FL Fs:Aftermarket parts:Eagle,ARP,ACL,Aeromotive,Precision & ka block & S14 sr S13 parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kooki · 01-26-2010, 08:05 AM

Location:Tampa FL
Willing to ship at buyers expense and may accept trades
Trades include: S14 parts, or some aggressive name brand wheels in 17 or 18 no less the 9" wide and also have month old 17x9.5 +15 mb battles I can throw on top!!

I had plans to build this ka but wanna go in a different direction so I need this stuff gone

This is pretty much a complete unassembled motor minus pistons..

KA24DE parts:
-ARP 10mm head studs(brand new still in plasic wrap) $80
-Eagle rods w/ ARP 2000 rod bolts(brand new) $275
-ACL race bearings $75 (rod and main)
-Aeromotive fuel pressure regulator $100 (bottom half aluminum finish top half powder coated black w/ rainbow metal flake)
-Top feed rail $100 (powder coated to match regulator)
-S13 valve cover $50(powder coated to match reg. and rail)
-Precision 550cc top feed injectors w/ injector clips(saturated so no need for resistor box) $150

-Ka24de block w/ girdle $100(cleaned just needs freeze plugs which are like $5)
-ka24de crank which has been cleaned and looked over $50(good condition)
I have all the other bolts and parts for the motor as well.. including oil pump water pump ect..EVERYTHING!

-ka24de fresh ported and polished head and port matched intake manifold(head has been ran thru a cleaning machine, each valve spring has been pressure tested, has brand new valve seals and was reassembled and shimed..nvr been put on a motor yet) $400

-S14 SR intake manifold with all sensors, throttle body ect..$90
-3 q45 ignitor chips $50 each

-s13 radio brackets with pocket $30

If theres any parts not listed here ask, I may have it..I have lots of parts

PM ME IF YOU HAVE ANY QUESTIONS!

D1S13 · 01-26-2010, 08:21 AM

pm about rail.

bump good stuff.

Kooki · 01-27-2010, 02:30 PM

Pm'd...Bump

Kooki · 02-04-2010, 06:27 PM

Bump...........

s13coupe805 · 02-08-2010, 09:07 PM

i tried pm'ing you but it wont let me, please pm me so we can talk about buying most of the parts

Kooki · 02-17-2010, 10:32 AM

Last Bump!

*racerx2k1* · 02-17-2010, 02:41 PM

Quote:

Originally Posted by Kooki

Pm'd...Bump

Quote:

Originally Posted by Kooki

Bump...........

Quote:

Originally Posted by Kooki

Last Bump!

2 bump limit. You can start new thread in 3 days.

01-26-2010, 08:05 AM	#1
Kooki Zilvia Member Join Date: Mar 2009 Location: FL Posts: 169 Trader Rating: (3) Feedback Score: 3 reviews	Fs:Aftermarket parts:Eagle,ARP,ACL,Aeromotive,Precision & ka block & S14 sr S13 parts Location:Tampa FL Willing to ship at buyers expense and may accept trades Trades include: S14 parts, or some aggressive name brand wheels in 17 or 18 no less the 9" wide and also have month old 17x9.5 +15 mb battles I can throw on top!! I had plans to build this ka but wanna go in a different direction so I need this stuff gone This is pretty much a complete unassembled motor minus pistons.. KA24DE parts: -ARP 10mm head studs(brand new still in plasic wrap) $80 -Eagle rods w/ ARP 2000 rod bolts(brand new) $275 -ACL race bearings $75 (rod and main) -Aeromotive fuel pressure regulator $100 (bottom half aluminum finish top half powder coated black w/ rainbow metal flake) -Top feed rail $100 (powder coated to match regulator) -S13 valve cover $50(powder coated to match reg. and rail) -Precision 550cc top feed injectors w/ injector clips(saturated so no need for resistor box) $150 -Ka24de block w/ girdle $100(cleaned just needs freeze plugs which are like $5) -ka24de crank which has been cleaned and looked over $50(good condition) I have all the other bolts and parts for the motor as well.. including oil pump water pump ect..EVERYTHING! -ka24de fresh ported and polished head and port matched intake manifold(head has been ran thru a cleaning machine, each valve spring has been pressure tested, has brand new valve seals and was reassembled and shimed..nvr been put on a motor yet) $400 -S14 SR intake manifold with all sensors, throttle body ect..$90 -3 q45 ignitor chips $50 each -s13 radio brackets with pocket $30 If theres any parts not listed here ask, I may have it..I have lots of parts PM ME IF YOU HAVE ANY QUESTIONS! __________________

01-26-2010, 08:21 AM	#2
D1S13 Zilvia Addict Join Date: May 2007 Location: phx Posts: 830 Trader Rating: (9) Feedback Score: 9 reviews	pm about rail. bump good stuff. __________________ www.teamtopflight.blogspot.com

01-27-2010, 02:30 PM	#3
Kooki Zilvia Member Join Date: Mar 2009 Location: FL Posts: 169 Trader Rating: (3) Feedback Score: 3 reviews	Pm'd...Bump __________________

02-04-2010, 06:27 PM	#4
Kooki Zilvia Member Join Date: Mar 2009 Location: FL Posts: 169 Trader Rating: (3) Feedback Score: 3 reviews	Bump........... __________________

02-08-2010, 09:07 PM	#5
s13coupe805 Zilvia Junkie Join Date: Mar 2007 Location: OXNARD Posts: 401 Trader Rating: (2) Feedback Score: 2 reviews	i tried pm'ing you but it wont let me, please pm me so we can talk about buying most of the parts __________________ Steve Garrett ep-unlimited.com

02-17-2010, 10:32 AM	#6
Kooki Zilvia Member Join Date: Mar 2009 Location: FL Posts: 169 Trader Rating: (3) Feedback Score: 3 reviews	Last Bump! __________________