TEC2 and SR20DET Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Fireball240SX · 11-09-2003, 09:51 PM

Hey guys i've been searching forums for anything to do with electromotive tec2 but to no avial. I'm having a friend install my redtop SR20DET into my 240SX Coupe this upcoming weekend.

My mods are as follows:Electromotive TEC w/ TEC2 Software,4Wire EGO Sensor,3BAR Map Sensor,MAT, and Coolant Sensors,S13 SR20DET Redtop w/ cut harness NO CAS(cam angle sensor),Greddy 2Row FMIC,Heavy Throttle SR20DET EZinstall kit, Heavy Throttle SR20DET EZ Tuneup kit,Apexi Twinchamber or DSM BOV,MKIV 550cc Injectors,Walbro 255lph fuel pump, Greddy 3" Downpipe,GREX Rocker Arm Stoppers, etc.

well maybe a little overdescriptive but im looking to find out if:

1. Do i need a Cam Angle Sensor for my crank trigger wheel.
2. Which Crank trigger wheel do i get from Electromotive because no one there can seem to tell me or help me out.
3. Can i keep the same coil on plug sparkplug wires even though im using the Electromotive unit.

If anyone on the board can let me know it would be greatly appreciated

steve shadows · 11-10-2003, 04:32 PM

go on freshalloy.com pm a guy by the sn of 1bad180sx he is using tec II on his sr right now u believe, i have had experience playing with the tec II on an sr but never installed one. Im sure that you have to make your own custom bracket for the crank trigger.

-steve

Fireball240SX · 11-11-2003, 05:44 AM

Quote:

Originally posted by rpsports
go on freshalloy.com pm a guy by the sn of 1bad180sx he is using tec II on his sr right now u believe, i have had experience playing with the tec II on an sr but never installed one. Im sure that you have to make your own custom bracket for the crank trigger.

-steve

Thanks alot...I tracked him down and sent an email!

11-09-2003, 09:51 PM	#1
Fireball240SX Join Date: Mar 2003 Location: Lancaster, PA Age: 42 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	TEC2 and SR20DET Help Hey guys i've been searching forums for anything to do with electromotive tec2 but to no avial. I'm having a friend install my redtop SR20DET into my 240SX Coupe this upcoming weekend. My mods are as follows:Electromotive TEC w/ TEC2 Software,4Wire EGO Sensor,3BAR Map Sensor,MAT, and Coolant Sensors,S13 SR20DET Redtop w/ cut harness NO CAS(cam angle sensor),Greddy 2Row FMIC,Heavy Throttle SR20DET EZinstall kit, Heavy Throttle SR20DET EZ Tuneup kit,Apexi Twinchamber or DSM BOV,MKIV 550cc Injectors,Walbro 255lph fuel pump, Greddy 3" Downpipe,GREX Rocker Arm Stoppers, etc. well maybe a little overdescriptive but im looking to find out if: 1. Do i need a Cam Angle Sensor for my crank trigger wheel. 2. Which Crank trigger wheel do i get from Electromotive because no one there can seem to tell me or help me out. 3. Can i keep the same coil on plug sparkplug wires even though im using the Electromotive unit. If anyone on the board can let me know it would be greatly appreciated __________________ 2 Liter is my Weapon of Choice Last edited by Fireball240SX; 11-09-2003 at 10:51 PM..

11-10-2003, 04:32 PM	#2
steve shadows Post Whore! Join Date: Aug 2003 Location: LA and OC Posts: 8,202 Trader Rating: (5) Feedback Score: 5 reviews	go on freshalloy.com pm a guy by the sn of 1bad180sx he is using tec II on his sr right now u believe, i have had experience playing with the tec II on an sr but never installed one. Im sure that you have to make your own custom bracket for the crank trigger. -steve __________________ Like Me on FaceBook !