Wtf thermostat!!!?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xxmarcusrxx · 05-25-2010, 12:42 PM

WTF thermostat! I did an emissions removal a little bit ago and while i was taking off the manifold I just thought I'd replace the thermo too. Well it started overheating QUICK once i threw everything back together. I took out the thermo and ran it, Temps were fine system bleed out nicely. So I got a thermo from Nissan Installed it and BAM! overheating, the thermo refuses to open, nothing coming out of the blurp hole, hot air, bleeding the system correctly, losened the upper heater core hose. NOTHING the damn coolant WONT FLOW. This is really starting to piss me off. I did this a little bit ago with no air problems. Im thinking there is only air hitting the thermo and not coolant?! HOw do i get the damn coolant to flow to the thermo?! Any help would be appreciated, tips & tricks??

Gnnr · 05-26-2010, 01:29 PM

Where you running a thermostat before you changed it?

Maybe you got a bad thermostat, get another one.

LayNLow · 05-26-2010, 01:30 PM

Did you put the juggle valve on top when you installed the thermo(s)?

nismoracingsx · 05-26-2010, 01:46 PM

no thermo ftw =p

BoostSlideWayz · 05-26-2010, 01:53 PM

i would use a radiator testor thing.just replaces where your rad cap goes, then while the fluid is in start to pump the radiator with pressure and see how high it gets.

Gnnr · 05-26-2010, 04:03 PM

Quote:

Originally Posted by nismoracingsx

no thermo ftw =p

No, running in open loop sucks. Mmmmkaaayyy. Engine runs like ass.

ddf2006 · 05-27-2010, 11:53 PM

a way u can test thermo is to boil some water on the stove and throw in the thermo and see if it opens, if not then theres ur problem. if it does open, then ur SOL lol

hassanbakar123 · 05-28-2010, 12:37 AM

can it be put in backwards?

05-25-2010, 12:42 PM	#1
xxmarcusrxx Zilvia Member Join Date: Aug 2006 Location: Indy East-Side Age: 37 Posts: 158 Trader Rating: (2) Feedback Score: 2 reviews	Wtf thermostat!!!?? WTF thermostat! I did an emissions removal a little bit ago and while i was taking off the manifold I just thought I'd replace the thermo too. Well it started overheating QUICK once i threw everything back together. I took out the thermo and ran it, Temps were fine system bleed out nicely. So I got a thermo from Nissan Installed it and BAM! overheating, the thermo refuses to open, nothing coming out of the blurp hole, hot air, bleeding the system correctly, losened the upper heater core hose. NOTHING the damn coolant WONT FLOW. This is really starting to piss me off. I did this a little bit ago with no air problems. Im thinking there is only air hitting the thermo and not coolant?! HOw do i get the damn coolant to flow to the thermo?! Any help would be appreciated, tips & tricks??

05-26-2010, 01:29 PM	#2
Gnnr Post Whore! Join Date: Apr 2005 Location: S. FL Posts: 3,960 Trader Rating: (0) Feedback Score: 0 reviews	Where you running a thermostat before you changed it? Maybe you got a bad thermostat, get another one. __________________

05-26-2010, 01:30 PM	#3
LayNLow Zilvia Junkie Join Date: Oct 2005 Location: memphis tn Posts: 346 Trader Rating: (1) Feedback Score: 1 reviews	Did you put the juggle valve on top when you installed the thermo(s)? __________________

05-26-2010, 01:53 PM	#5
BoostSlideWayz Nissanaholic! Join Date: Sep 2008 Location: Lebec Age: 36 Posts: 1,686 Trader Rating: (1) Feedback Score: 1 reviews	i would use a radiator testor thing.just replaces where your rad cap goes, then while the fluid is in start to pump the radiator with pressure and see how high it gets. __________________ 1994 toyota supra...... n-a D= 1992 nissan 240sx KA24E-T fully Built =D

05-28-2010, 12:37 AM	#8
hassanbakar123 Zilvia Junkie Join Date: Apr 2008 Location: san bernardino Posts: 375 Trader Rating: (1) Feedback Score: 1 reviews	can it be put in backwards? __________________ https://www.linkedin.com/in/hassanbakar

05-26-2010, 01:46 PM	#4
nismoracingsx Zilvia Addict Join Date: Sep 2007 Location: Alachua, FL Age: 38 Posts: 969 Trader Rating: (32) Feedback Score: 32 reviews	no thermo ftw =p

05-27-2010, 11:53 PM	#7
ddf2006 Zilvia Junkie Join Date: Jul 2009 Location: Moreno Valley Age: 32 Posts: 325 Trader Rating: (4) Feedback Score: 4 reviews	a way u can test thermo is to boil some water on the stove and throw in the thermo and see if it opens, if not then theres ur problem. if it does open, then ur SOL lol