Will a Sparco seat fit on Blitz or BRIDE rails? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xLSTONEx · 11-24-2003, 08:46 PM

Basically what the subject ask. I searched and read that the Sparco rails will make the Sparco racing seats sit way up high, but Blitz, Bride, and Nismo will make it sit close to stock. So does anyone know if they will fit on the Sparco seats.

thank you very much.

xLSTONEx · 11-24-2003, 09:49 PM

or will a sparco seat fit on stock seat brackets?

Dousan_PG · 11-25-2003, 08:46 AM

no it wont
sparco will NOT FIT on blitz or bride
bride for sure, i checked it myself

make your own rails. otherwise, suffer w/ crappy sparco rails.

xLSTONEx · 11-25-2003, 01:56 PM

will it fit on the stock rails? And at MVP they sell Spacro sliders but I'm not sure if that is the rails or not. What is so crappy about the Spacro rails also, do they just make the seat sit up really high or what?

Thanks

Dousan_PG · 11-25-2003, 02:06 PM

no it will NOT work w/ stock rails

yes you will sit drastically higher. definately noticeable.

TRUENOCOUPE · 11-25-2003, 02:16 PM

IONO about the 240 but Me and 247thx purchase a rail from sparco yesterday and it fits on my bride zeta II.

It wasn't exactly the right kit, We had to find the right sidemount and rails for it. But it FITS.

Dousan_PG · 11-25-2003, 02:19 PM

yep
sidemount is different
one guy i met did a bride rail w/ a sparco rev

slight modding fit perefct

but bottom mounts are different, wont match up right. i tried it when we had a few seats/rails around (jic, bride, sparco and momo)

xLSTONEx · 11-26-2003, 12:47 PM

where can i get some side mount rails? Either Spacro or Bride?

the head · 11-26-2003, 12:50 PM

bride can be aquired through www.takakaira.com

Dousan_PG · 11-26-2003, 12:52 PM

dotn go thru taka

go to www.tees-usa.com

aka BRIDE USA
and look at the dealer list.

pSY trek · 11-26-2003, 12:54 PM

Are Bride seats FIA approved?

-Stanley

Dousan_PG · 11-26-2003, 12:56 PM

Quote:

Originally posted by pSY trek
Are Bride seats FIA approved?

-Stanley

yes but not most model

iirc, one of the buckets is...contact Tees-usa.com for info on that. there is one or two that are FIA approved. which ones..i dont recall off hand.

xLSTONEx · 11-26-2003, 12:59 PM

thanks guys, what about the Spacro side mounts? Do they make the seat sit way up higher? And also how would I be able to slide the seat back and forth with side mounts, or is it just not possible? At MVP they sell Spacro seat sliders? What is there use?

Johny5 · 11-26-2003, 02:20 PM

i'm a very short guy so maybe the sparco rails would be good for me. if you do get your stuff from mvp, they do sell the sparco rails, they're just not listed and are on 2 weeks backorder for the 240. i cannot wait till my sprint gets in, slidey leather no goody goody. now to source a good harness

TRUENOCOUPE · 11-27-2003, 12:28 AM

JDM racing seats are not approved in racing here in the states.

xLSTONEx · 11-27-2003, 08:55 AM

so where do the sliders come in?

Johny5 · 11-27-2003, 09:16 AM

inbetween the base and the seat, just look at your stock seat configuration.

DoriftoSlut · 11-27-2003, 03:03 PM

It should be noted that this dude is probably not looking into getting a full bucket. He asked if Sparco seats will fit on stock sliders... i mean come on, a full bucket doesn't even look like it COULD fit on stock rails, no matter how educated (or not) you may be...

Anyway, most side mount seats will sit low in your car, no matter what bracket you buy. There are way more holes/slots than you actually need, and I don't see a reason why you would require Bride sidemount brackets.. unless you really just wanted to have "Bride" in your car

11-24-2003, 08:46 PM	#1
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	Will a Sparco seat fit on Blitz or BRIDE rails? Basically what the subject ask. I searched and read that the Sparco rails will make the Sparco racing seats sit way up high, but Blitz, Bride, and Nismo will make it sit close to stock. So does anyone know if they will fit on the Sparco seats. thank you very much.

11-25-2003, 08:46 AM	#3
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	no it wont sparco will NOT FIT on blitz or bride bride for sure, i checked it myself make your own rails. otherwise, suffer w/ crappy sparco rails. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

11-25-2003, 02:06 PM	#5
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	no it will NOT work w/ stock rails yes you will sit drastically higher. definately noticeable. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

11-25-2003, 02:16 PM	#6
TRUENOCOUPE Nissanaholic! Join Date: Mar 2003 Location: Norcal Drift Division Age: 42 Posts: 1,642 Trader Rating: (0) Feedback Score: 0 reviews	IONO about the 240 but Me and 247thx purchase a rail from sparco yesterday and it fits on my bride zeta II. It wasn't exactly the right kit, We had to find the right sidemount and rails for it. But it FITS. __________________ DRIFTxBATTLE IS GONE \| MYSPACE \| NORCAL DRIFT \| ZipTied Tee's

11-25-2003, 02:19 PM	#7
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	yep sidemount is different one guy i met did a bride rail w/ a sparco rev slight modding fit perefct but bottom mounts are different, wont match up right. i tried it when we had a few seats/rails around (jic, bride, sparco and momo) __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

11-24-2003, 09:49 PM	#2
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	or will a sparco seat fit on stock seat brackets?

11-25-2003, 01:56 PM	#4
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	will it fit on the stock rails? And at MVP they sell Spacro sliders but I'm not sure if that is the rails or not. What is so crappy about the Spacro rails also, do they just make the seat sit up really high or what? Thanks

11-26-2003, 12:47 PM	#8
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	where can i get some side mount rails? Either Spacro or Bride?

11-26-2003, 12:50 PM	#9
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 2,164 Trader Rating: (3) Feedback Score: 3 reviews	bride can be aquired through www.takakaira.com __________________ I never knew you could do that with an eggplant

11-26-2003, 12:52 PM	#10
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	dotn go thru taka go to www.tees-usa.com aka BRIDE USA and look at the dealer list. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

11-26-2003, 12:54 PM	#11
pSY trek Join Date: Jan 2003 Location: redlands Age: 42 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	Are Bride seats FIA approved? -Stanley

11-26-2003, 12:59 PM	#13
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	thanks guys, what about the Spacro side mounts? Do they make the seat sit way up higher? And also how would I be able to slide the seat back and forth with side mounts, or is it just not possible? At MVP they sell Spacro seat sliders? What is there use?

11-26-2003, 02:20 PM	#14
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	i'm a very short guy so maybe the sparco rails would be good for me. if you do get your stuff from mvp, they do sell the sparco rails, they're just not listed and are on 2 weeks backorder for the 240. i cannot wait till my sprint gets in, slidey leather no goody goody. now to source a good harness __________________ www.stewartleask.com

11-27-2003, 12:28 AM	#15
TRUENOCOUPE Nissanaholic! Join Date: Mar 2003 Location: Norcal Drift Division Age: 42 Posts: 1,642 Trader Rating: (0) Feedback Score: 0 reviews	JDM racing seats are not approved in racing here in the states. __________________ DRIFTxBATTLE IS GONE \| MYSPACE \| NORCAL DRIFT \| ZipTied Tee's

11-27-2003, 08:55 AM	#16
xLSTONEx BANNED Join Date: Jul 2001 Location: Kennesaw, GA Age: 39 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	so where do the sliders come in?

11-27-2003, 09:16 AM	#17
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	inbetween the base and the seat, just look at your stock seat configuration. __________________ www.stewartleask.com

11-27-2003, 03:03 PM	#18
DoriftoSlut Nissanaholic! Join Date: Nov 2002 Location: SoCal and Hawaii Age: 41 Posts: 1,986 Trader Rating: (0) Feedback Score: 0 reviews	It should be noted that this dude is probably not looking into getting a full bucket. He asked if Sparco seats will fit on stock sliders... i mean come on, a full bucket doesn't even look like it COULD fit on stock rails, no matter how educated (or not) you may be... Anyway, most side mount seats will sit low in your car, no matter what bracket you buy. There are way more holes/slots than you actually need, and I don't see a reason why you would require Bride sidemount brackets.. unless you really just wanted to have "Bride" in your car __________________ Death Before Dishonor. www.pinkgodzira.com www.driftalliance.com