Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 10-31-2010, 10:55 AM   #1
Stunt'nSlide
Zilvia Junkie
 
Join Date: Oct 2010
Location: nor cal
Posts: 310
Trader Rating: (-1)
Stunt'nSlide is an unknown quantity at this point
Feedback Score: -1 reviews
Car won't start.

I've got a 89 240sx coupe with a single cam and it is a auto to 5 speed swap. When i turn my key to on the gauge cluster lights don't come on and the fuel pump doesn't prime. When I try and start it nothing happens. My lights come on when I turn them on. I took a volt meter to my starter, battery, and everything in between and it all comes out to 12V. I had the car started yesterday and I'm not sure what I did.
Stunt'nSlide is offline   Reply With Quote
Sponsored Links
Old 10-31-2010, 01:26 PM   #2
Stunt'nSlide
Zilvia Junkie
 
Join Date: Oct 2010
Location: nor cal
Posts: 310
Trader Rating: (-1)
Stunt'nSlide is an unknown quantity at this point
Feedback Score: -1 reviews
Heres the full story to kinda help you out. My car was running good started all the time. Then my battery died and I couldn't jump start it. I took the battery to autozone to check it and it was ok, they said something must hve been draining my battery. So I realized even with my car off my cd deck was always on so I disconnected that. I then went back to autozone to get new battery cables and terminals just because mine looked kinda old. I installed them and then when I went to start my car it wouldnt start. I later realized that the black/yellow igniton wire to the starter was just hanging by wire and when I replaced my cables I must of knoked it off. So I connected it correctly and my car started but it was idling at like 200 and wanted to die. Next day I went to start it and same thing happened again, No fuel pump prime, starter wouldnt activate and no dash lights. I looked at the black/yellow wire and it was snug. and all battery wires were on good. the red box looking thing that connects to the battery and goes to the fuse box was a little loose so i tightened it and still nothing.
Stunt'nSlide is offline   Reply With Quote
Old 10-31-2010, 03:36 PM   #3
Stunt'nSlide
Zilvia Junkie
 
Join Date: Oct 2010
Location: nor cal
Posts: 310
Trader Rating: (-1)
Stunt'nSlide is an unknown quantity at this point
Feedback Score: -1 reviews
anyone. I need to get this done before next months drift event.
Stunt'nSlide is offline   Reply With Quote
Old 11-01-2010, 11:38 AM   #4
Stunt'nSlide
Zilvia Junkie
 
Join Date: Oct 2010
Location: nor cal
Posts: 310
Trader Rating: (-1)
Stunt'nSlide is an unknown quantity at this point
Feedback Score: -1 reviews
got it running. Still runs like shit but I think its because of my gas tank leak and charcoal canister being hooked up wrong. But anyways I guess the connection to the fuse boz was a little loose because when I wiggled it I heard my fuel pump prime.
Stunt'nSlide is offline   Reply With Quote
Old 11-03-2010, 06:15 PM   #5
nissan_slider
 
nissan_slider's Avatar
 
Join Date: Oct 2010
Location: Mebane, NC
Age: 38
Posts: 5
Trader Rating: (0)
nissan_slider is an unknown quantity at this point
Feedback Score: 0 reviews
hey im having kinda the same problem, I try to start the car no fuel pump prime and no starter, what was your problem.
nissan_slider is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net