CA Vortech 6:1 FMU NEW, SR20 T25

[StryfeS13]

I have a vortech FMU i used for seriously LESS than 10 miles. Has a hole slotted in the bracket so it can mount to the strut bar, as seen in picture.

$110 Shipped. These are $170 new.



Also have a T25 off an SR20. Has minimal side to side shaft play, and some in/out. Not sure if it needs a rebuild, but it worked and spooled fine on my KA-T...

$80 Shipped.

[spools420a]

I usually dont post negative things and I'm not trying to flame but thats a knock off fmu not a vortech fmu,Vortech will have a V and say vortech on the top,You can get a knock off fmu on ebay for $80,I hope you didnt pay $170 for a FMU when you could have got a SFMU for that price,Again I'm not trying to flame but just letting you know.I compared my real vortech to a knock off assuming there the identical design but the knock off had a thinner material for the diaphram.


Please wait
Image not available

[Jonathong]

I was about to say the same. Didn't think it was a real one.

Sent from my HTC Vision using Tapatalk

[StryfeS13]

I have a receipt from JEGS. It is indeed a vortech.

[StryfeS13]

Bump...no one needs the turbo?

[StryfeS13]

Last bump....