CA F/S: Carbing strut bar, drift freaq mounts, SR flywheel, and MORE stuff you need! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

racepar1 · 01-29-2011, 01:43 PM

Carbing steel front strut tower bar
This is an authentic carbing one-piece steel front strut tower bar. It will work for an s-13 or s-14. The paint is chipped and scuffed here and there, but the bar is not dented or bent anywhere. Fitment is awesome!

$100

UN-USED drift freaq urethane engine mounts (yellow)
I'm getting the new mounts so I don't need these anymore. These are probably the best mounts out there. I had another set that I used for years without issue. They're true isolated mounts and do not significantly increase vibration. These are un-used, they have only been installed for mock-up.

SOLD!

Stock, MACHINED, RWD SR20 flywheel
This is a stock OEM flywheel for a RWD SR20. It is freshly machined, ready to use...

$50

Un-cracked S-13 coolant tank
This is an OE nissan coolant tank in un-cracked, not leaking condition. It comes with the plastic cap and the hose.

$25

12" electric fan
I'm not sure of the brand, but it is in good working condition. I do not have any of the mounting hardware though, you would need to buy a mounting kit.

$20

S-13 KA starter
It's pretty dirty, but it is in good, working condition. The pigtail with the connector is missing though, you would have to wire yours up to it...

$20

S-13 SOHC KA belts
I have a full set of barely used, good condition, s-13 KAE accessory drive belts. All 3 belts are included and I will not separate them...

$10

S-13 SOHC alternator
It's pretty dirty, but it is in good, working condition. It is originally from a SOHC KA, but I think you can use it on a KADE if you swap the pulleys.

$20

S-13 SOHC ignition coil/bracket
This coil is in good working condition and is originally from a SOHC KA. It can be used on a KADE, but you have to lengthen the connector a little to reach...

$10

S-14 SR lower harness
This is a complete, un-damaged S-14 SR lower trans. harness. All connectors are in good shape and nothing is cut.

$40

S-13 SR20DET coilpack harness
The harness is in great shape, no damage.

$25

racepar1 · 01-31-2011, 11:56 AM

First bump........

Wreckless35 · 01-31-2011, 12:07 PM

Strut bar shipped to 20176... Price please.

SofaKingFast · 01-31-2011, 12:24 PM

Interested in any trades?

racepar1 · 01-31-2011, 12:35 PM

Quote:

Originally Posted by Wreckless35

Strut bar shipped to 20176... Price please.

I'll PM you with a shipped price right now...

Quote:

Originally Posted by SofaKingFast

Interested in any trades?

Sorry, no trades. I doubt many people would have anything that I would be interested in...

Jay97240Sx · 01-31-2011, 05:29 PM

Engine mounts shipped to 33351

n8RPS13 · 01-31-2011, 06:36 PM

Whats up Dood! Great seller bought a KA from him!

racepar1 · 02-01-2011, 12:26 PM

Last bump, more parts added...

Jay97240Sx · 02-10-2011, 05:20 PM

Received my mounts today. Thanx Bro !!

Fonix36 · 02-11-2011, 01:57 AM

how about a pm on the coil pack harness

01-29-2011, 01:43 PM	#1
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	F/S: Carbing strut bar, drift freaq mounts, SR flywheel, and MORE stuff you need! Carbing steel front strut tower bar This is an authentic carbing one-piece steel front strut tower bar. It will work for an s-13 or s-14. The paint is chipped and scuffed here and there, but the bar is not dented or bent anywhere. Fitment is awesome! *$100* UN-USED drift freaq urethane engine mounts (yellow) I'm getting the new mounts so I don't need these anymore. These are probably the best mounts out there. I had another set that I used for years without issue. They're true isolated mounts and do not significantly increase vibration. These are un-used, they have only been installed for mock-up. *SOLD!* Stock, MACHINED, RWD SR20 flywheel This is a stock OEM flywheel for a RWD SR20. It is freshly machined, ready to use... *$50* Un-cracked S-13 coolant tank This is an OE nissan coolant tank in un-cracked, not leaking condition. It comes with the plastic cap and the hose. *$25* 12" electric fan I'm not sure of the brand, but it is in good working condition. I do not have any of the mounting hardware though, you would need to buy a mounting kit. *$20* S-13 KA starter It's pretty dirty, but it is in good, working condition. The pigtail with the connector is missing though, you would have to wire yours up to it... *$20* S-13 SOHC KA belts I have a full set of barely used, good condition, s-13 KAE accessory drive belts. All 3 belts are included and I will not separate them... *$10* S-13 SOHC alternator It's pretty dirty, but it is in good, working condition. It is originally from a SOHC KA, but I think you can use it on a KADE if you swap the pulleys. *$20* S-13 SOHC ignition coil/bracket This coil is in good working condition and is originally from a SOHC KA. It can be used on a KADE, but you have to lengthen the connector a little to reach... *$10* S-14 SR lower harness This is a complete, un-damaged S-14 SR lower trans. harness. All connectors are in good shape and nothing is cut. *$40* S-13 SR20DET coilpack harness The harness is in great shape, no damage. *$25* Last edited by racepar1; 02-01-2011 at 10:34 AM..

01-31-2011, 06:36 PM	#7
n8RPS13 Zilvia FREAK! Join Date: Sep 2009 Location: New Smyrna Beach Posts: 1,296 Trader Rating: (22) Feedback Score: 22 reviews	Whats up Dood! Great seller bought a KA from him! __________________ WASTED I AM!

02-11-2011, 01:57 AM	#10
Fonix36 Nissanaholic! Join Date: Mar 2008 Location: southern cali Age: 35 Posts: 2,457 Trader Rating: (34) Feedback Score: 34 reviews	how about a pm on the coil pack harness __________________ DRiFT 4 A Cure!

01-31-2011, 11:56 AM	#2
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	First bump........

01-31-2011, 12:24 PM	#4
SofaKingFast Zilvia Addict Join Date: May 2003 Location: Glendale/City of Industry Age: 44 Posts: 605 Trader Rating: (43) Feedback Score: 43 reviews	Interested in any trades?

01-31-2011, 05:29 PM	#6
Jay97240Sx Leaky Injector Join Date: Jan 2009 Location: Fort Lauderdale Age: 44 Posts: 57 Trader Rating: (2) Feedback Score: 2 reviews	Engine mounts shipped to 33351

02-01-2011, 12:26 PM	#8
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Last bump, more parts added...

02-10-2011, 05:20 PM	#9
Jay97240Sx Leaky Injector Join Date: Jan 2009 Location: Fort Lauderdale Age: 44 Posts: 57 Trader Rating: (2) Feedback Score: 2 reviews	Received my mounts today. Thanx Bro !!