FL t/w on built ka-t setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14fbs · 02-14-2011, 03:20 PM

im testing waters on my built ka-t to maybe to a stock ka n/a to buy a truck

the motor was built about 4 months ago has around 2500-3000 miles on it

cp pistons .20 over 9-1
eagle rods
arp main and head studs and rod bolts
new nissan oem
water pump
oil pump
timing chains
guides
thermostat
valve cover gasket
oil pan gasket
block was honed to .20 over and both head and block were decked for perfect seal
felpro head gasket
rebuilt stock head new felrpo valves seals ect
s13 cams and head with s14 block
s14 tranny with short shifter
spec stage 3 clutch

turbo
turbonetics .50 63 t/3 t/4 ceramic coated
tgs manifold cermamic coasted
tial wastegate 38mm with 4- 8-10 psi springs
jim wolf fuel rail
prescion 75lb injectors only used for 3 hours
enapthly rom ecu setup for this setup needs a couple dyno pulls for perfection
cx racing modified down pipe perfect fit

the motor is on the stand and will go back in the car friday if no one has serious interest
will sell turbo and motor separate but the motor has to sell first
taken last week

the day it was installed with 0 miles

first start up

jsaviour84 · 02-14-2011, 03:37 PM

how much for the motor and turbo set

s14fbs · 02-14-2011, 04:43 PM

Quote:

Originally Posted by jsaviour84

how much for the motor and turbo set

pm me a offer

ross.cottrill · 02-14-2011, 05:46 PM

give us an ideah as to what your looking for..

s14fbs · 02-14-2011, 06:01 PM

Quote:

Originally Posted by ross.cottrill

give us an ideah as to what your looking for..

probally around 3-3500 maybe less maybe more like i said i have no idea ik i have like 6 in the motor setup with turbo motor tuning ect but i dont expect to get anywhere near that id like to get back at least half though

spartanmisfit · 02-14-2011, 06:41 PM

Wow. Very nice job man. Please keep it!

username · 02-14-2011, 09:29 PM

nice setup, glws

bmitchell_ga · 02-14-2011, 09:37 PM

I'm interrested in motor and can pick up pm me what your looking to get for just the engine. You can keep turbo, mani, etc. I'm down to trade plus cash on my end also if you need a stock motor

Herra_Frush · 02-14-2011, 10:43 PM

Interested in trades for a s14 se?

s14fbs · 02-14-2011, 10:49 PM

Quote:

Originally Posted by Herra_Frush

Interested in trades for a s14 se?

pm me pics and info

s14fbs · 02-15-2011, 12:40 AM

i forgot i will also consider trading a sr long block and tranny so i can just take my turbo setup and put it on a sr

eSThurTeen · 02-15-2011, 02:04 AM

would u take 3500 shipped???

eSThurTeen · 02-15-2011, 02:05 AM

interested in selling mishi rad??

eSThurTeen · 02-15-2011, 02:11 AM

how much u looking to get on topp of stock ka??

s14fbs · 02-15-2011, 03:23 AM

Quote:

Originally Posted by eSThurTeen

would u take 3500 shipped???

pm me to work out a price

Quote:

Originally Posted by eSThurTeen

interested in selling mishi rad??

rad stays on that car

Quote:

Originally Posted by eSThurTeen

how much u looking to get on topp of stock ka??

dont need another ka i have a stock ka next to the built one ready to be used if needed sorry

s14fbs · 02-16-2011, 09:12 PM

bump one!!!!!!!!!!!!!!!

s14fbs · 02-17-2011, 01:11 AM

this can be locked motor has been put back in the car

02-14-2011, 03:20 PM	#1
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 35 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	t/w on built ka-t setup im testing waters on my built ka-t to maybe to a stock ka n/a to buy a truck the motor was built about 4 months ago has around 2500-3000 miles on it cp pistons .20 over 9-1 eagle rods arp main and head studs and rod bolts new nissan oem water pump oil pump timing chains guides thermostat valve cover gasket oil pan gasket block was honed to .20 over and both head and block were decked for perfect seal felpro head gasket rebuilt stock head new felrpo valves seals ect s13 cams and head with s14 block s14 tranny with short shifter spec stage 3 clutch turbo turbonetics .50 63 t/3 t/4 ceramic coated tgs manifold cermamic coasted tial wastegate 38mm with 4- 8-10 psi springs jim wolf fuel rail prescion 75lb injectors only used for 3 hours enapthly rom ecu setup for this setup needs a couple dyno pulls for perfection cx racing modified down pipe perfect fit the motor is on the stand and will go back in the car friday if no one has serious interest will sell turbo and motor separate but the motor has to sell first taken last week the day it was installed with 0 miles first start up __________________ http://strictlycoolstuff.tumblr.com/

02-14-2011, 03:37 PM	#2
jsaviour84 Zilvia Junkie Join Date: Oct 2010 Location: ny Age: 40 Posts: 379 Trader Rating: (7) Feedback Score: 7 reviews	how much for the motor and turbo set __________________ EVO X GSR and R32 GTR

02-14-2011, 05:46 PM	#4
ross.cottrill Zilvia FREAK! Join Date: Sep 2005 Location: orlando,fl Posts: 1,185 Trader Rating: (12) Feedback Score: 12 reviews	give us an ideah as to what your looking for.. __________________ " NEO VVL BABY FTMFW!" Originally Posted by shagspeed Dude if I made 500WHP on a 54C SR20DET back in 1999-2000 with old school technology .. This VET will T-BAG your RB engines

02-15-2011, 12:40 AM	#11
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 35 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	i forgot i will also consider trading a sr long block and tranny so i can just take my turbo setup and put it on a sr __________________ http://strictlycoolstuff.tumblr.com/

02-16-2011, 09:12 PM	#16
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 35 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	bump one!!!!!!!!!!!!!!! __________________ http://strictlycoolstuff.tumblr.com/

02-14-2011, 06:41 PM	#6
spartanmisfit Zilvia FREAK! Join Date: Jul 2008 Location: East Lansing, Michigan Posts: 1,332 Trader Rating: (18) Feedback Score: 18 reviews	Wow. Very nice job man. Please keep it!

02-14-2011, 09:29 PM	#7
username Zilvia Member Join Date: Sep 2008 Location: Florida Age: 34 Posts: 207 Trader Rating: (5) Feedback Score: 5 reviews	nice setup, glws

02-14-2011, 09:37 PM	#8
bmitchell_ga Zilvia Member Join Date: Dec 2008 Location: south ga Age: 42 Posts: 159 Trader Rating: (5) Feedback Score: 5 reviews	I'm interrested in motor and can pick up pm me what your looking to get for just the engine. You can keep turbo, mani, etc. I'm down to trade plus cash on my end also if you need a stock motor

02-14-2011, 10:43 PM	#9
Herra_Frush Join Date: Feb 2011 Location: North Florida Age: 32 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Interested in trades for a s14 se?

02-15-2011, 02:04 AM	#12
eSThurTeen Leaky Injector Join Date: Jun 2010 Location: El paso Age: 34 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	would u take 3500 shipped???

02-15-2011, 02:05 AM	#13
eSThurTeen Leaky Injector Join Date: Jun 2010 Location: El paso Age: 34 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	interested in selling mishi rad??

02-15-2011, 02:11 AM	#14
eSThurTeen Leaky Injector Join Date: Jun 2010 Location: El paso Age: 34 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	how much u looking to get on topp of stock ka??

02-17-2011, 01:11 AM	#17
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 35 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	this can be locked motor has been put back in the car __________________ http://strictlycoolstuff.tumblr.com/