temp gauge not working help!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zenki_cb · 08-27-2011, 07:16 PM

Anyone know why this could be happing. My temp gauge doesnt work at all. Before I did my s14 sr swap my temp gauge was working and now that i swapped it in it doesnt work at all. Now I been doing some research and I read that I have to put a ka temp sensor instead of the sr one is this true. Any feedback would be great thanks for looking.

jdm213 · 08-27-2011, 07:22 PM

hey i waana know 2 i have the same got dam porblem after my sr swap but it prolly not hooked up .. maybe urs isnt either

zerocoolalmi · 08-27-2011, 07:53 PM

chek condictibility between sensor and f4 connector.. if is good the troub is in the dash harness .. and .. chek the resistance of the water temps gauge sensor

DinoMan · 08-27-2011, 09:12 PM

Not sure if its the same with you but when i swapped my s13 sr into my s14 i had the same problem. Got a temp sensor for a s14 ka from a parts store, swapped it, and now my gauge reads fine. Heard you just have to match the sensor with the cluster. s14 with s14 and s13 with s13

c-los13 · 08-27-2011, 09:42 PM

^^^^^^^ your right
THIS HAS BEEN COVERED 1000000000 TIMES!!!!!

*fliprayzin240sx* · 08-28-2011, 06:59 PM

He said it doesnt work at all, I'd check the wiring from the ECU kick panel to the chassis/cluster wiring. Shouldnt matter to the OP, he said he did an S14 SR swap into an S14. Sensors will be the same between the 2.

08-27-2011, 07:16 PM	#1
Zenki_cb Zilvia Member Join Date: Oct 2010 Location: SoCal Age: 39 Posts: 261 Trader Rating: (3) Feedback Score: 3 reviews	temp gauge not working help!!!!! Anyone know why this could be happing. My temp gauge doesnt work at all. Before I did my s14 sr swap my temp gauge was working and now that i swapped it in it doesnt work at all. Now I been doing some research and I read that I have to put a ka temp sensor instead of the sr one is this true. Any feedback would be great thanks for looking. __________________

08-28-2011, 06:59 PM	#6
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	He said it doesnt work at all, I'd check the wiring from the ECU kick panel to the chassis/cluster wiring. Shouldnt matter to the OP, he said he did an S14 SR swap into an S14. Sensors will be the same between the 2. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

08-27-2011, 07:22 PM	#2
jdm213 Zilvia Addict Join Date: Sep 2009 Location: los angeles Age: 35 Posts: 960 Trader Rating: (10) Feedback Score: 10 reviews	hey i waana know 2 i have the same got dam porblem after my sr swap but it prolly not hooked up .. maybe urs isnt either

08-27-2011, 07:53 PM	#3
zerocoolalmi Join Date: Jan 2010 Location: quebec plessisville Age: 34 Posts: 44 Trader Rating: (0) Feedback Score: 0 reviews	chek condictibility between sensor and f4 connector.. if is good the troub is in the dash harness .. and .. chek the resistance of the water temps gauge sensor

08-27-2011, 09:12 PM	#4
DinoMan Zilvia Junkie Join Date: Feb 2011 Location: Pensacola Fl Age: 30 Posts: 362 Trader Rating: (2) Feedback Score: 2 reviews	Not sure if its the same with you but when i swapped my s13 sr into my s14 i had the same problem. Got a temp sensor for a s14 ka from a parts store, swapped it, and now my gauge reads fine. Heard you just have to match the sensor with the cluster. s14 with s14 and s13 with s13

08-27-2011, 09:42 PM	#5
c-los13 Zilvia Junkie Join Date: Feb 2010 Location: Edinburg, Texas Age: 36 Posts: 446 Trader Rating: (0) Feedback Score: 0 reviews	^^^^^^^ your right THIS HAS BEEN COVERED 1000000000 TIMES!!!!!