FL Brian Crower 264/Apex'i power intake S14sr - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

genericforumname · 10-11-2011, 11:59 PM

just like the thread title says I've got a practically new set of brian crower 264's for an S14sr. had originally wanted to use them when I swapped my sr in but decided to go with a Tomei set so these are burning space. they were installed for a short time and torqued down but the engine was never turned over (it was on a stand at the time) and it was not turned by hand either. will come with the original plastic bags inside the original red box.
-$280 shipped

another dumb decision I made was with my intake so my loss your gain. its a standard Apex'i power intake with filter etc. was installed and ran for less than 100 or so miles before I decided to go ahead and deal with getting it tuned and at the same time switched to a z32 MAF so this intake was no longer useful.
-$50 shipped

these prices are OBO. not really looking for trades just cash. would prefer to sell local to avoid shipping but I can do that if necessary.

its dark and everything else is sitting on the passenger side floorboard but heres a pic of the filter:

and one of the cams:

sorry for the iffy quality but my phone doesn't do so well in low light conditions.

genericforumname · 10-14-2011, 12:58 PM

bump, prices now include shipping

waya3w · 10-14-2011, 03:37 PM

do you have pictures of the intake? im interest thanks

genericforumname · 10-19-2011, 08:39 PM

bumpan with new prices! my hours at work just got cut! BUY THESE!

undercoverdjay · 10-20-2011, 01:39 AM

How does the Z32 MAF differ for this filter?

genericforumname · 10-20-2011, 05:32 PM

I'm not sure exactly what you mean but the physical filter uses slightly different screw locations for where it bolts into the filter adapter plate thing.....not sure how to describe it if that makes since.

edit: I've also got the factory s14sr maf and the part it sits in between the filter and intake pipe if you need it

10-11-2011, 11:59 PM	#1
genericforumname Zilvia Member Join Date: Sep 2007 Location: Florida, where we prove that shit does in fact run down hill Age: 36 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	Brian Crower 264/Apex'i power intake S14sr just like the thread title says I've got a practically new set of brian crower 264's for an S14sr. had originally wanted to use them when I swapped my sr in but decided to go with a Tomei set so these are burning space. they were installed for a short time and torqued down but the engine was never turned over (it was on a stand at the time) and it was not turned by hand either. will come with the original plastic bags inside the original red box. -$280 shipped another dumb decision I made was with my intake so my loss your gain. its a standard Apex'i power intake with filter etc. was installed and ran for less than 100 or so miles before I decided to go ahead and deal with getting it tuned and at the same time switched to a z32 MAF so this intake was no longer useful. -$50 shipped these prices are OBO. not really looking for trades just cash. would prefer to sell local to avoid shipping but I can do that if necessary. its dark and everything else is sitting on the passenger side floorboard but heres a pic of the filter: and one of the cams: sorry for the iffy quality but my phone doesn't do so well in low light conditions. Last edited by genericforumname; 10-19-2011 at 08:37 PM.. Reason: edited for pics/prices

10-14-2011, 12:58 PM	#2
genericforumname Zilvia Member Join Date: Sep 2007 Location: Florida, where we prove that shit does in fact run down hill Age: 36 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	bump, prices now include shipping

10-14-2011, 03:37 PM	#3
waya3w Join Date: Feb 2011 Location: san jose Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	do you have pictures of the intake? im interest thanks

10-19-2011, 08:39 PM	#4
genericforumname Zilvia Member Join Date: Sep 2007 Location: Florida, where we prove that shit does in fact run down hill Age: 36 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	bumpan with new prices! my hours at work just got cut! BUY THESE!

10-20-2011, 01:39 AM	#5
undercoverdjay Zilvia Junkie Join Date: Apr 2004 Location: Potsdam New York Age: 41 Posts: 594 Trader Rating: (2) Feedback Score: 2 reviews	How does the Z32 MAF differ for this filter?

10-20-2011, 05:32 PM	#6
genericforumname Zilvia Member Join Date: Sep 2007 Location: Florida, where we prove that shit does in fact run down hill Age: 36 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	I'm not sure exactly what you mean but the physical filter uses slightly different screw locations for where it bolts into the filter adapter plate thing.....not sure how to describe it if that makes since. edit: I've also got the factory s14sr maf and the part it sits in between the filter and intake pipe if you need it