SR20 intake/recirculation questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Supraman127 · 02-26-2012, 01:35 AM

Yes, I searched, but didn't really find anything.

My question is, where I can get an SR intake pipe that has a fitting for both pcv hose and a fitting for recirculating your BOV?

twinspool · 02-26-2012, 02:18 PM

make one, or get one made by a shop

Boost_Fiend · 02-26-2012, 06:25 PM

there is a intake pipe on ebay sold for the sr that looks like it has all the ports for catch can and recirc. It's 130 shipped w/ k&n filter. I've been thinking about getting one to clean up my engine bay and it's the only hard pipe ive seen that has all the ports. or you can just use the stock rubber intake

Supraman127 · 02-27-2012, 01:53 AM

Quote:

Originally Posted by Boost_Fiend

there is a intake pipe on ebay sold for the sr that looks like it has all the ports for catch can and recirc. It's 130 shipped w/ k&n filter. I've been thinking about getting one to clean up my engine bay and it's the only hard pipe ive seen that has all the ports. or you can just use the stock rubber intake

this?

Nissan 240SX S13 SR20DET 89-94 Suction Air Intake System Systems + K&N AirFilter | eBay

dpritchard4 · 02-27-2012, 07:29 AM

do NOT get that POS!!!! the seller does not tell you its cast in what looks like sand. the inside has more rough spots then sand paper, no joke at all....its horrible....im currently looking for another solution for this...one option http://pipingpro.com/shop/sr20det-in...take-p-65.html and they will add everything u need

240jake · 02-27-2012, 07:35 AM

i bought that same intake off ebay, and while I will say that it does technically work , its heavy as shit for what it is and is cast very poorly.

is this knarly potted and grooved inside gonna mess with my intake flow?

Also the ports are glued in and not welded! might be jb welding up my own custom pipe for this in the end. at least its still not a bad deal considering the k&n filter it comes with is $50 and you get some neat couplers hehe.

Kingtal0n · 02-27-2012, 06:40 PM

i always had to tig one up from a U-bend of 3" aluminum material.

02-26-2012, 01:35 AM	#1
Supraman127 Leaky Injector Join Date: Jun 2007 Location: SoCal Age: 35 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	SR20 intake/recirculation questions Yes, I searched, but didn't really find anything. My question is, where I can get an SR intake pipe that has a fitting for both pcv hose and a fitting for recirculating your BOV?

02-26-2012, 02:18 PM	#2
twinspool Zilvia Junkie Join Date: May 2006 Location: mississippi Posts: 349 Trader Rating: (7) Feedback Score: 7 reviews	make one, or get one made by a shop

02-26-2012, 06:25 PM	#3
Boost_Fiend Zilvia Member Join Date: Jan 2009 Location: Ft. Lauderdale, FL Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	there is a intake pipe on ebay sold for the sr that looks like it has all the ports for catch can and recirc. It's 130 shipped w/ k&n filter. I've been thinking about getting one to clean up my engine bay and it's the only hard pipe ive seen that has all the ports. or you can just use the stock rubber intake

02-27-2012, 07:29 AM	#5
dpritchard4 Leaky Injector Join Date: Aug 2010 Location: pa Age: 36 Posts: 85 Trader Rating: (5) Feedback Score: 5 reviews	do NOT get that POS!!!! the seller does not tell you its cast in what looks like sand. the inside has more rough spots then sand paper, no joke at all....its horrible....im currently looking for another solution for this...one option http://pipingpro.com/shop/sr20det-in...take-p-65.html and they will add everything u need

02-27-2012, 07:35 AM	#6
240jake Zilvia Member Join Date: Nov 2008 Location: New Mexico Age: 41 Posts: 213 Trader Rating: (0) Feedback Score: 0 reviews	i bought that same intake off ebay, and while I will say that it does technically work , its heavy as shit for what it is and is cast very poorly. is this knarly potted and grooved inside gonna mess with my intake flow? Also the ports are glued in and not welded! might be jb welding up my own custom pipe for this in the end. at least its still not a bad deal considering the k&n filter it comes with is $50 and you get some neat couplers hehe.

02-27-2012, 06:40 PM	#7
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 42 Posts: 4,829 Trader Rating: (17) Feedback Score: 17 reviews	i always had to tig one up from a U-bend of 3" aluminum material.