ka waterpump pulley question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Goldeneye9mm · 04-07-2012, 06:12 PM

i wanted to know if this would fit on a s13 ka24de waterpump and align with the belts properly. i asked in small questions but got completely ignored so i made a thread. sorry for adding bandwidth but i really would like to know and i don't have anything to compare in person. all help is greatly appreciated.

Nkelley · 04-07-2012, 09:03 PM

if you need a wp pulley for your ka i have one. i dont think the sr one is the same

merks · 04-07-2012, 09:06 PM

The sr pulley is 4 ribbed where the ka24de is 2or 3 (I don't really remember)but it will work. I'm running an Isis water and power steering pulley on my ka24de. I can get pictures if you want

Goldeneye9mm · 04-08-2012, 01:23 PM

A picture would be awesome if you could get one. Thank you both for real input and advice. Small questions was worthless.

merks · 04-09-2012, 02:07 PM

best pictures I could get with out removing fan shroud

rat240 · 04-10-2012, 02:15 AM

do they make car go faster

Goldeneye9mm · 04-10-2012, 05:27 AM

No but they reduce the speed of the water pump and fan so your cooling system it more effective at high engine rpms and less parasitic drag from the fan as well if the still use the clutch fan. Plus I love Yashio factory parts and there is no ka24de in Japan for them to make these parts for.

merks · 04-10-2012, 10:31 AM

They do make it rev a little more freely.

If I read correctly when I was researching this, you can actually use a stock sr crank pulley to underdrive the ka24de and will allow you to use the proper belts. Again I haven't actually tried but this is what I've read.

Chaluska · 04-10-2012, 09:01 PM

Quote:

Originally Posted by merks

They do make it rev a little more freely.

If I read correctly when I was researching this, you can actually use a stock sr crank pulley to underdrive the ka24de and will allow you to use the proper belts. Again I haven't actually tried but this is what I've read.

...

Yoshio factory bullshit gayjdm pulley.. save 4 oz over stock rotating assemby for bajillion dollar....

Get a lightweight flywheel, and shave 12 LBS off of stock rotating assembly, for 150$...

screw a water pump pulley..

the KA doesnt have a problem with cavatation like the shitty SR

brizanden · 04-10-2012, 09:01 PM

Quote:

Originally Posted by Goldeneye9mm

No but they reduce the speed of the water pump and fan so your cooling system it more effective at high engine rpms and less parasitic drag from the fan as well if the still use the clutch fan. Plus I love Yashio factory parts and there is no ka24de in Japan for them to make these parts for.

they actuallly did have a ka'd 240 there and they made some parts, but all ka owners were too much of cheapasses and they dropped the idea.

04-07-2012, 06:12 PM	#1
Goldeneye9mm Zilvia Member Join Date: Oct 2007 Location: Baltimore, Maryland Age: 39 Posts: 173 Trader Rating: (2) Feedback Score: 2 reviews	ka waterpump pulley question i wanted to know if this would fit on a s13 ka24de waterpump and align with the belts properly. i asked in small questions but got completely ignored so i made a thread. sorry for adding bandwidth but i really would like to know and i don't have anything to compare in person. all help is greatly appreciated.

04-09-2012, 02:07 PM	#5
merks Leaky Injector Join Date: Oct 2009 Location: Hunteresville Age: 34 Posts: 93 Trader Rating: (2) Feedback Score: 2 reviews	best pictures I could get with out removing fan shroud __________________ 90 hatch-first s13- first failed project 96 zenki, hid retro fit- ls1 2013

04-10-2012, 10:31 AM	#8
merks Leaky Injector Join Date: Oct 2009 Location: Hunteresville Age: 34 Posts: 93 Trader Rating: (2) Feedback Score: 2 reviews	They do make it rev a little more freely. If I read correctly when I was researching this, you can actually use a stock sr crank pulley to underdrive the ka24de and will allow you to use the proper belts. Again I haven't actually tried but this is what I've read. __________________ 90 hatch-first s13- first failed project 96 zenki, hid retro fit- ls1 2013

04-07-2012, 09:03 PM	#2
Nkelley Zilvia Member Join Date: May 2010 Location: phoenix, az Age: 35 Posts: 283 Trader Rating: (10) Feedback Score: 10 reviews	if you need a wp pulley for your ka i have one. i dont think the sr one is the same

04-07-2012, 09:06 PM	#3
merks Leaky Injector Join Date: Oct 2009 Location: Hunteresville Age: 34 Posts: 93 Trader Rating: (2) Feedback Score: 2 reviews	The sr pulley is 4 ribbed where the ka24de is 2or 3 (I don't really remember)but it will work. I'm running an Isis water and power steering pulley on my ka24de. I can get pictures if you want

04-08-2012, 01:23 PM	#4
Goldeneye9mm Zilvia Member Join Date: Oct 2007 Location: Baltimore, Maryland Age: 39 Posts: 173 Trader Rating: (2) Feedback Score: 2 reviews	A picture would be awesome if you could get one. Thank you both for real input and advice. Small questions was worthless.

04-10-2012, 02:15 AM	#6
rat240 Post Whore! Join Date: Nov 2007 Location: zipcode Posts: 3,307 Trader Rating: (87) Feedback Score: 87 reviews	do they make car go faster

04-10-2012, 05:27 AM	#7
Goldeneye9mm Zilvia Member Join Date: Oct 2007 Location: Baltimore, Maryland Age: 39 Posts: 173 Trader Rating: (2) Feedback Score: 2 reviews	No but they reduce the speed of the water pump and fan so your cooling system it more effective at high engine rpms and less parasitic drag from the fan as well if the still use the clutch fan. Plus I love Yashio factory parts and there is no ka24de in Japan for them to make these parts for.