Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 06-18-2012, 06:49 PM   #1
casman86
 
casman86's Avatar
 
Join Date: Jan 2005
Location: Springfield, MO
Age: 39
Posts: 11
Trader Rating: (0)
casman86 is an unknown quantity at this point
Feedback Score: 0 reviews
s14 Fuel tank temperature sensor? Rich idle, stalling.

I have a '96 S14 JWT ecu in a '95 S14 and I'm getting code 42 (0402) which is fuel tank temperature sensor. I looked through the FSMs for both years and apparently this is something they added in '96, my '95 doesn't have it.

My question is if this affects fuel and timing? I'm having issues with stalling and really rich idle (10-11:1afr). I have all emissions removed, knock sensor bypassed. I've tested basically everything at this point. If the fuel tank temp sensor absence might be doing this I'll wire one up, but don't want to waste time if it's a useless sensor that doesn't change any ecu parameters.
__________________
95 S14 KA-T
casman86 is offline   Reply With Quote
Sponsored Links
Old 06-19-2012, 01:50 PM   #2
ka4life87
Leaky Injector
 
Join Date: Jun 2012
Location: casa grande
Posts: 104
Trader Rating: (0)
ka4life87 is an unknown quantity at this point
Feedback Score: 0 reviews
I never knew the s14 has a fuel tank temperature sensor, u sure its not a code for fuel tank pressure sensor? If its pressure that purely emissions and wont affect performance or fuel ratio at all
ka4life87 is offline   Reply With Quote
Old 06-19-2012, 02:35 PM   #3
casman86
 
casman86's Avatar
 
Join Date: Jan 2005
Location: Springfield, MO
Age: 39
Posts: 11
Trader Rating: (0)
casman86 is an unknown quantity at this point
Feedback Score: 0 reviews
Yep it's for fuel tank temperature sensor. I compared the pinouts and they started it in 96, obd2 crap. I'm gonna assume it doesn't matter just like the IAT. I finally found my issue after wasting about a week doing diagnostics, dirty MAF! This was one of the first things I should have checked! My idle voltage on my cobra maf went from .8v dirty, to .5v clean. My car went from idling in the 10/11's to the 14/15's or even leaner when hot. It also richened up the top end significantly. I used a q-tip and 91% alcohol to clean the wires, they went from black with buildup to shiny silver. Clean your MAFs everybody, they get retarded.
__________________
95 S14 KA-T

Last edited by casman86; 06-19-2012 at 02:38 PM.. Reason: more info
casman86 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net