BEE*R Rev limiter/KA24DE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DARKEST_HOUR · 09-15-2007, 01:13 AM

*searched

Anyone successfully install the Bee* R rev limiter into there obdII KA ??

Can't get mine to work

I went by ritz_s14 instructions of

"For those of you who ever plan to install a BEE*R Rev limiter on your s14
Red is ignition
Black is ground
White(optional)-ebrake switch

4Cyl = Cut Grey Wire
Rotary Engines: Cut Brown Wire
6Cyl = leave all wires intact.

Yellow-pin 44/40 is your reference signal(1degree)
Green-41/45 is your 180degree signal."

it didn't work
help !

illvialuver · 09-15-2007, 04:10 AM

no i havent but i want one for mine, so ill check back to see when you get this finished

DARKEST_HOUR · 09-17-2007, 10:21 PM

So anyone if the rev limiter worked for ritz_s14.I sent him a few messages . . . no reply

Paint209 · 02-22-2013, 03:12 AM

back from the dead. anyone?

cparcell · 05-12-2013, 03:19 AM

It's easy use pin 38 ac/power blk/red stripe with red wire beer, pin 39 blk with blk beer which is ground, pin 40 with yellow wire and pin 41 with green wire. This works for a 95 ka24de manual Trans. Male sure beer is on 1-10 gain and rev limit on 4k to test

09-15-2007, 01:13 AM	#1
DARKEST_HOUR Zilvia Member Join Date: Jul 2005 Location: * Posts: 162 Trader Rating: (0) Feedback Score: 0 reviews	*BEER Rev limiter/KA24DE ???** searched Anyone successfully install the Bee R rev limiter into there obdII KA ?? Can't get mine to work I went by ritz_s14 instructions of "For those of you who ever plan to install a BEER Rev limiter on your s14 Red is ignition Black is ground White(optional)-ebrake switch 4Cyl = Cut Grey Wire Rotary Engines: Cut Brown Wire 6Cyl = leave all wires intact. Yellow-pin 44/40 is your reference signal(1degree) Green-41/45 is your 180degree signal." it didn't work help ! Last edited by DARKEST_HOUR; 09-15-2007 at 03:36 PM..*

02-22-2013, 03:12 AM	#4
Paint209 Zilvia Member Join Date: Aug 2011 Location: CA Age: 32 Posts: 244 Trader Rating: (4) Feedback Score: 4 reviews	back from the dead. anyone? __________________

09-15-2007, 04:10 AM	#2
illvialuver Post Whore! Join Date: Oct 2006 Location: M-A-R-S... MARS BITCHES Age: 42 Posts: 5,065 Trader Rating: (35) Feedback Score: 35 reviews	no i havent but i want one for mine, so ill check back to see when you get this finished

09-17-2007, 10:21 PM	#3
DARKEST_HOUR Zilvia Member Join Date: Jul 2005 Location: * Posts: 162 Trader Rating: (0) Feedback Score: 0 reviews	So anyone if the rev limiter worked for ritz_s14.I sent him a few messages . . . no reply

05-12-2013, 03:19 AM	#5
cparcell Join Date: Mar 2012 Location: hillsboro oh Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	It's easy use pin 38 ac/power blk/red stripe with red wire beer, pin 39 blk with blk beer which is ground, pin 40 with yellow wire and pin 41 with green wire. This works for a 95 ka24de manual Trans. Male sure beer is on 1-10 gain and rev limit on 4k to test