1UZFE into S-Chassis - Page 9 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Vongsayarath · 01-18-2014, 09:10 PM

Hey guys. Wondering if anyone would have a input here. But which year models didnt have the ecu immobilizer? Or. Did someone figure out a bypass?

Also to Turtle.....how much are you adapter plates for ka and mounts going for. Also curious on your processing times.

Fries · 01-19-2014, 08:40 AM

Quote:

Originally Posted by Vongsayarath

Hey guys. Wondering if anyone would have a input here. But which year models didnt have the ecu immobilizer? Or. Did someone figure out a bypass?

Also to Turtle.....how much are you adapter plates for ka and mounts going for. Also curious on your processing times.

VVTI motors had the ecu immobilizer. So get a sub 1990-1996 motor and you'll be good

MrChow · 01-19-2014, 03:38 PM

Quote:

Originally Posted by Vongsayarath

Hey guys. Wondering if anyone would have a input here. But which year models didnt have the ecu immobilizer? Or. Did someone figure out a bypass?

Also to Turtle.....how much are you adapter plates for ka and mounts going for. Also curious on your processing times.

Any 1uz motor from 98 and up are the vvti motor and all of them have immobilizer. I'm in the process of dealing with immobilizer I'll update once I get it finished.

Fries · 01-23-2014, 02:54 PM

1jz alternator plug will fit on the early model 1uzs. I picked mine up from wiringspecialties.com

Sent from my XT1080 using Tapatalk

Fries · 01-26-2014, 11:07 AM

I guess you need to modify some shit with the starter to make it fit the flywheel right?
Also you need the stock spacer for the flywheel? I have like 2 spacers, is there a size difference?

imperium · 01-29-2014, 01:00 AM

has anyone had any luck with Brett Collins lately? i ordered a swap kit on the 16th and on the 19th he emailed me to confirm some specifics about the order. i haven't heard anything else since but its only been a week, i want to give the guy the benefit of the doubt but it almost sounds like i shouldn't. I also don't want to get screwed over. not too sure what i should do at this point

turtle m3th · 01-30-2014, 09:22 AM

I wouldn't expect your order anytime soon. I had to open up a paypal claim to get my items in a decent time frame the last time I dealt with him.

MiamiZ33 · 01-30-2014, 09:34 AM

I haven't made any noise on here in a while, so I'll provide an update:

I got my car running two weeks ago! Runs like a champ now, I have been spending my time buttoning up the wiring/interior and beating the shit out of it whenever I get a chance. I haven't even taken any video or pics of it since it's been running correctly, but I will have something up this weekend I promise.

I won't go into the long-winded story of how I figured out what was wrong, but I will say that the igniters need to be grounded VERY well or else weird intermittent bad things happen

The car sounds nuts, it's crazy, it's loud, it's deafening (seriously, it's pretty deafening). Definitely slower than my Z, but since it's attacking all your senses, it seems faster.

88Coupe · 01-30-2014, 04:35 PM

Getting ready to hopefully put one of these in my coupe. Cant wait!

JDMcheddar · 01-30-2014, 06:42 PM

Quote:

Originally Posted by imperium

has anyone had any luck with Brett Collins lately? i ordered a swap kit on the 16th and on the 19th he emailed me to confirm some specifics about the order. i haven't heard anything else since but its only been a week, i want to give the guy the benefit of the doubt but it almost sounds like i shouldn't. I also don't want to get screwed over. not too sure what i should do at this point

Brett is a very standup guy. One of the nicest dudes in drifting. The adapter stuff is just something he does on the side and it kinda blew up faster then he was expecting. So don't worry about getting screwed over. It's just like anything sometimes you gotta just be a pain in the ass to get things quicker.

imperium · 01-30-2014, 06:59 PM

at the same time i dont want to be waiting 6 months for stuff to arrive, i was hoping to be done this swap sometime in april intime for the local drift season

Drifting Kalamari · 02-01-2014, 11:02 PM

MiamiZ33 ---> Super happy to hear yours is up and running! Can't wait for mine to get finished!!!

Brett is an awesome guy and I back him 100%. Never had a problem getting in touch with him when needed.

Fries · 02-02-2014, 03:33 PM

Quote:

Originally Posted by MiamiZ33

I haven't made any noise on here in a while, so I'll provide an update:

I got my car running two weeks ago! Runs like a champ now, I have been spending my time buttoning up the wiring/interior and beating the shit out of it whenever I get a chance. I haven't even taken any video or pics of it since it's been running correctly, but I will have something up this weekend I promise.

I won't go into the long-winded story of how I figured out what was wrong, but I will say that the igniters need to be grounded VERY well or else weird intermittent bad things happen

The car sounds nuts, it's crazy, it's loud, it's deafening (seriously, it's pretty deafening). Definitely slower than my Z, but since it's attacking all your senses, it seems faster.

Where's the video jerk face?

So I was taking out my PCV and it was stuck in the grommet (literally was able to start picking the motor up while pulling on it) Finally got it out and the grommet broke a little and some pieces fell in the valve cover.

Soooo yeah, waiting on a valve cover seal and new grommet. Then I gotta actually wire it up, have my trans xmember modified then I can start doing loud noise stuff.

MrChow · 02-02-2014, 05:36 PM

Sooo.... Would anyone here be interested doing a group buy for H-beam rods? Normal price I believe is $650 and I think we can get it down to $450 maybe. I'll get more details once I get them.

Fries · 02-03-2014, 05:59 AM

Quote:

Originally Posted by MrChow

Sooo.... Would anyone here be interested doing a group buy for H-beam rods? Normal price I believe is $650 and I think we can get it down to $450 maybe. I'll get more details once I get them.

My understanding is that the stock rods are good to like 600-700 hp?

Fries · 02-03-2014, 09:58 AM

Got my headers and EGR block off plates from Turtle. Thanks for the work man!

MrChow · 02-03-2014, 01:34 PM

Quote:

Originally Posted by Fries

My understanding is that the stock rods are good to like 600-700 hp?

The early year motors rods can take a good amount. I've see like 500.

Quote:

Originally Posted by Fries

Got my headers and EGR block off plates from Turtle. Thanks for the work man!

Oh wow. Okay turtle you sold me.
Hehe I don't have an egr on my 1uz. =D

88Coupe · 02-03-2014, 09:03 PM

Has anyone had an issue with the automatic rev limiters?? It only happens when the cars cold. Motors out of a 92

Sent from my iPhone using Tapatalk

88Coupe · 02-05-2014, 03:22 PM

Any input on last post?

Sent from my iPhone using Tapatalk

turbronegro · 02-05-2014, 04:08 PM

Quote:

Originally Posted by Fries

Got my headers and EGR block off plates from Turtle. Thanks for the work man!

I really need an egr block off plate. I'll be moving to socal soon and I wouldnt mind a set of turbo headers too.

Drifting Kalamari · 02-06-2014, 08:57 PM

Turtle, those headers look great!

turtle m3th · 02-07-2014, 10:36 AM

Thanks for the kind words folks!

turbronegro · 02-08-2014, 08:45 AM

Anyone considering supercharging their 1uzfe?

JDMcheddar · 02-08-2014, 10:01 AM

Quote:

Originally Posted by turbronegro

Anyone considering supercharging their 1uzfe?

Brett Collins has one. It's crazy. There are a lot of supercharged 1uz.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

turbronegro · 02-08-2014, 11:33 AM

I know I have the v2 centrifugal supercharger bracket (fish bracket) to fit the 1uz. Debating on turbo or sc.

turtle m3th · 02-08-2014, 12:05 PM

Mine will be supercharged with a v2 on a fish bracket with an aem fic 8 and some 440cc 7mgte injectors. All the parts are in order, I just need to do the install, but I've been too busy working on my sr hachi.

turbronegro · 02-08-2014, 01:16 PM

I might sell my fish bracket and go with a single turbo.

Fries · 02-09-2014, 04:46 PM

I hate everything plastic on the 1uz. That shit be like "ooooh SNAP".
Assuming I have my powersteering hoses, motor should be in its final resting place for wiring this weekend. Yeehaw.

Now... how to get out of valentines in order to play in garage.

turbronegro · 02-09-2014, 08:10 PM

I've broken all of my harness.

PoorBoyBrian · 02-09-2014, 09:09 PM

Quote:

Originally Posted by turbronegro

Anyone considering supercharging their 1uzfe?

Quote:

Originally Posted by JDMcheddar

Brett Collins has one. It's crazy. There are a lot of supercharged 1uz.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

I built Brett's cage, and can vouch for his setup is fast as hell.

Sent from my smaht fonez. Ignore grammar, spelling, and auto correct.

01-23-2014, 02:54 PM	#244
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 37 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	1jz alternator plug will fit on the early model 1uzs. I picked mine up from wiringspecialties.com Sent from my XT1080 using Tapatalk __________________

01-26-2014, 11:07 AM	#245
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 37 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	I guess you need to modify some shit with the starter to make it fit the flywheel right? Also you need the stock spacer for the flywheel? I have like 2 spacers, is there a size difference? __________________

01-30-2014, 09:22 AM	#247
turtle m3th Nissanaholic! Join Date: Mar 2005 Location: San Diego Age: 38 Posts: 1,608 Trader Rating: (41) Feedback Score: 41 reviews	I wouldn't expect your order anytime soon. I had to open up a paypal claim to get my items in a decent time frame the last time I dealt with him. __________________ "cigarettes killed my father, and raped my mother!"

01-30-2014, 09:34 AM	#248
MiamiZ33 Zilvia Member Join Date: Sep 2011 Location: Miami, FL Age: 41 Posts: 258 Trader Rating: (1) Feedback Score: 1 reviews	I haven't made any noise on here in a while, so I'll provide an update: I got my car running two weeks ago! Runs like a champ now, I have been spending my time buttoning up the wiring/interior and beating the shit out of it whenever I get a chance. I haven't even taken any video or pics of it since it's been running correctly, but I will have something up this weekend I promise. I won't go into the long-winded story of how I figured out what was wrong, but I will say that the igniters need to be grounded VERY well or else weird intermittent bad things happen The car sounds nuts, it's crazy, it's loud, it's deafening (seriously, it's pretty deafening). Definitely slower than my Z, but since it's attacking all your senses, it seems faster. __________________ '05 350Z Vortech @ 12 psi (SOLD ) '89 240SX 1UZ (turbo?) coupe

02-03-2014, 09:58 AM	#256
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 37 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	Got my headers and EGR block off plates from Turtle. Thanks for the work man! __________________

01-18-2014, 09:10 PM	#241
Vongsayarath Zilvia Member Join Date: Mar 2011 Location: United States Age: 35 Posts: 152 Trader Rating: (0) Feedback Score: 0 reviews	Hey guys. Wondering if anyone would have a input here. But which year models didnt have the ecu immobilizer? Or. Did someone figure out a bypass? Also to Turtle.....how much are you adapter plates for ka and mounts going for. Also curious on your processing times.

01-29-2014, 01:00 AM	#246
imperium Join Date: Sep 2012 Location: victoria bc Age: 34 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	has anyone had any luck with Brett Collins lately? i ordered a swap kit on the 16th and on the 19th he emailed me to confirm some specifics about the order. i haven't heard anything else since but its only been a week, i want to give the guy the benefit of the doubt but it almost sounds like i shouldn't. I also don't want to get screwed over. not too sure what i should do at this point

01-30-2014, 04:35 PM	#249
88Coupe Leaky Injector Join Date: Jun 2012 Location: Delaware Age: 30 Posts: 78 Trader Rating: (2) Feedback Score: 2 reviews	Getting ready to hopefully put one of these in my coupe. Cant wait!

01-30-2014, 06:59 PM	#251
imperium Join Date: Sep 2012 Location: victoria bc Age: 34 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	at the same time i dont want to be waiting 6 months for stuff to arrive, i was hoping to be done this swap sometime in april intime for the local drift season

02-01-2014, 11:02 PM	#252
Drifting Kalamari Zilvia Member Join Date: Jul 2012 Location: Woodstock Age: 42 Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews	MiamiZ33 ---> Super happy to hear yours is up and running! Can't wait for mine to get finished!!! Brett is an awesome guy and I back him 100%. Never had a problem getting in touch with him when needed.

02-03-2014, 09:03 PM	#258
88Coupe Leaky Injector Join Date: Jun 2012 Location: Delaware Age: 30 Posts: 78 Trader Rating: (2) Feedback Score: 2 reviews	Has anyone had an issue with the automatic rev limiters?? It only happens when the cars cold. Motors out of a 92 Sent from my iPhone using Tapatalk

02-05-2014, 03:22 PM	#259
88Coupe Leaky Injector Join Date: Jun 2012 Location: Delaware Age: 30 Posts: 78 Trader Rating: (2) Feedback Score: 2 reviews	Any input on last post? Sent from my iPhone using Tapatalk

02-06-2014, 08:57 PM	#261
Drifting Kalamari Zilvia Member Join Date: Jul 2012 Location: Woodstock Age: 42 Posts: 176 Trader Rating: (0) Feedback Score: 0 reviews	Turtle, those headers look great!

02-07-2014, 10:36 AM	#262
turtle m3th Nissanaholic! Join Date: Mar 2005 Location: San Diego Age: 38 Posts: 1,608 Trader Rating: (41) Feedback Score: 41 reviews	Thanks for the kind words folks! __________________ "cigarettes killed my father, and raped my mother!"

02-08-2014, 08:45 AM	#263
turbronegro Zilvia Junkie Join Date: Sep 2012 Location: SoCal Age: 36 Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	Anyone considering supercharging their 1uzfe?

02-08-2014, 11:33 AM	#265
turbronegro Zilvia Junkie Join Date: Sep 2012 Location: SoCal Age: 36 Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	I know I have the v2 centrifugal supercharger bracket (fish bracket) to fit the 1uz. Debating on turbo or sc. Last edited by turbronegro; 02-08-2014 at 01:15 PM..

02-08-2014, 12:05 PM	#266
turtle m3th Nissanaholic! Join Date: Mar 2005 Location: San Diego Age: 38 Posts: 1,608 Trader Rating: (41) Feedback Score: 41 reviews	Mine will be supercharged with a v2 on a fish bracket with an aem fic 8 and some 440cc 7mgte injectors. All the parts are in order, I just need to do the install, but I've been too busy working on my sr hachi. __________________ "cigarettes killed my father, and raped my mother!" Last edited by turtle m3th; 02-09-2014 at 11:22 AM..

02-08-2014, 01:16 PM	#267
turbronegro Zilvia Junkie Join Date: Sep 2012 Location: SoCal Age: 36 Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	I might sell my fish bracket and go with a single turbo.

02-09-2014, 04:46 PM	#268
Fries Zilvia FREAK! Join Date: May 2007 Location: Texas/or/Afghanistan Age: 37 Posts: 1,514 Trader Rating: (3) Feedback Score: 3 reviews	I hate everything plastic on the 1uz. That shit be like "ooooh SNAP". Assuming I have my powersteering hoses, motor should be in its final resting place for wiring this weekend. Yeehaw. Now... how to get out of valentines in order to play in garage. __________________

02-09-2014, 08:10 PM	#269
turbronegro Zilvia Junkie Join Date: Sep 2012 Location: SoCal Age: 36 Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	I've broken all of my harness.