manual ecu in a swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dori2 s13coupe · 10-07-2004, 01:42 AM

~s13~ SO.. im doing a auto to manual swap.. i kno i have to relay the top connectors for the auto ecu and all that.. BUT what if i use a manual ecu... will i have to relay still and/or will i have to do more wiring? and will the auto harness plug into the manual ecu? reason im using a manual ecu is because it is reprogrammed with a higher fuel curve

dori2 s13coupe · 10-07-2004, 12:53 PM

no one knos?

mjjstang · 10-07-2004, 03:51 PM

what u mean, Im using the 62 redtop ecu, I have a new harness also but it should be the same, all ecus should line up, then no matter what u do u still need to jump those 2 wires, its so simple (yet ill agree before I did it I didnt know what to do and looked to be too hard) all the wiring I think I did was jumper that connector, and it turned over, I didnt start it as im not even close to getting it running yet.

10-07-2004, 01:42 AM	#1
dori2 s13coupe Zilvia Junkie Join Date: May 2003 Location: Cerritos, CA Age: 38 Posts: 504 Trader Rating: (0) Feedback Score: 0 reviews	manual ecu in a swap ~s13~ SO.. im doing a auto to manual swap.. i kno i have to relay the top connectors for the auto ecu and all that.. BUT what if i use a manual ecu... will i have to relay still and/or will i have to do more wiring? and will the auto harness plug into the manual ecu? reason im using a manual ecu is because it is reprogrammed with a higher fuel curve __________________ Signature Not Available

10-07-2004, 12:53 PM	#2
dori2 s13coupe Zilvia Junkie Join Date: May 2003 Location: Cerritos, CA Age: 38 Posts: 504 Trader Rating: (0) Feedback Score: 0 reviews	no one knos? __________________ Signature Not Available

10-07-2004, 03:51 PM	#3
mjjstang Post Whore! Join Date: Apr 2003 Location: Michigan Posts: 2,654 Trader Rating: (5) Feedback Score: 5 reviews	what u mean, Im using the 62 redtop ecu, I have a new harness also but it should be the same, all ecus should line up, then no matter what u do u still need to jump those 2 wires, its so simple (yet ill agree before I did it I didnt know what to do and looked to be too hard) all the wiring I think I did was jumper that connector, and it turned over, I didnt start it as im not even close to getting it running yet. __________________ I was going to, but I can not think of a sig less than 75 characters.