WA RB25DET NEO 6 part out gt3071r full swap

[MC.Understeer]

Video of it running November 16, 2014 before I pulled the swap

Rb25 swap before swap is pulled to sell November . . .: http://youtu.be/De33Eig0O3o





http://images.craigslist.org/00000_b...2Y_600x450.jpg
http://images.craigslist.org/00h0h_4...UU_600x450.jpg
http://images.craigslist.org/01010_1...zs_600x450.jpg
http://images.craigslist.org/00T0T_f...hw_600x450.jpg
http://images.craigslist.org/00808_l...uo_600x450.jpg
http://images.craigslist.org/00g0g_k...4Z_600x450.jpg


This swap is currently in a s13 coupe running and driving without any issues. Once I get some people wanting parts I will make a documented video of the date and time with the engine running and transmission working to supply to any buyers of parts from this listing before any parts are removed. If you are interested in anything such as the engine, all parts can be removed same day within a few hours.

RB25det NEO 6 - LONGBLOCK valve covers to oil pan minus(NO exhaust and intake manifolds)
(block has ACL Main, Rod race bearings and thrust washers with about 4500-5000 miles) $1000

RB25DET 5spd trans in perfect working condition $850
ORC hyper single clutch with lots of life left and low miles $700
One piece steel driveshaft $280
Mckinney Swap mounts $300
Wiring specialties rb25det to s13 harness $400
Apexi SAFC wired into the wiring specialties harness $160 added to the harness or can be removed
Stock rb25det NEO 6 ecu $160
Aftermarket intake manifold $400
Power by max oil filter relocation kit combined with a oil cooler that has less than 3000miles of use, works on sr20det, 2jz and other nissan and toyota's $200
850cc modded top feed injectors $250
Top mount sch40 custom stainless steel manifold setup for twin tial 38mm wastegates $700
Downpipe $160
JDM RSR 3" cat back exhaust with oval muffler in good condition no rust $300
Tial 38mm wastegates $280 each (have two obviously)
GT3071r ball bearing turbo with 4500-5000 miles on it $850
Raw brokerage Front mount intercooler setup $300
Raw brokerage RB radiator with fans $250
RB catch can setup (in picture with fittings) $150
16x8 et30 205/50 16x9 et35 225/50 3 piece Stern wheels made in Japan. No curbing or bends, just need to be sand blasted because they've been spray painted. $500 tires have a good amount of life left.
Sparco offset champion 350mm steering wheel. Only a couple months old. No wear or damage.
$150


The more you buy, the more you save. No trades and prices are FIRM unless you buy multiple items. All prices are very reasonable and if you can't tell by the mod list, I know what these parts are worth and cost new so don't even waste my time trying to haggle with me.

[adamhanna]

i dont want to add all the rb25 stuff up, how much for full swap? and whereabouts in wa are you?

thanks

[Bnr32gtr]

I want the intake manifold please call or text me 4436046344 what's your pay pal thanks

[Wykydtron]

Hello to a local in PNW! glws

[sleeper108]

Interested in the turbo, and possibly that manifold. What kind if power were you getting with this setup?

[PrimeDirective]

On the long block...is there an upgraded head gasket and head studs? What about the water and oil pump?

[Bnr32gtr]

What your pay pall I want the intake manifold please give me a text 4436046344 I can send $ now!

[MC.Understeer]

Originally Posted by sleeper108

Interested in the turbo, and possibly that manifold. What kind if power were you getting with this setup?

It was just on a stock ecu and AVCR still using the maf. It was making 320whp 300wtq on about 13ish PSI. Didn't try to push it any further to see when it would start outflowing the maf.

Originally Posted by PrimeDirective

On the long block...is there an upgraded head gasket and head studs? What about the water and oil pump?

Just the ACL bearings and thrust washer. Wouldn't be worth shipping. For a local its a good deal as it would cost a fair amount to have ACL bearings installed. And they can inspect the motor themselves. Most people around here know me and know I have a good reputation or have seen this car running and know the history of it as it hardly was ever drivin. After shipping tho I wouldn't see it being worth it to the buyer. Also it MIGHT be sold tomorrow to a local.

[PrimeDirective]

I am local Anyways it sounds like a good deal and I'm 50/50 on if I needed to spend money on this right now anyways. GLWS.

[RB25GUY]

Package deal on the twin 38s exhaust Mani and downpipe? Also do the 38's come with screamer pipes pm me

[MR_GUTTI]

pics of radiator and intercooler please!!!
what throttle body are you running in the video? thanks

[Bnr32gtr]

Intake manifold sold thank u sir, good dude right here boy fastest shipper ever!

[MC.Understeer]

Originally Posted by MR_GUTTI

pics of radiator and intercooler please!!!
what throttle body are you running in the video? thanks

Q45 throttle body (not for sale)

Will PM you some pics when I get to work tomorrow

Thanks!

Originally Posted by RB25GUY

Package deal on the twin 38s exhaust Mani and downpipe? Also do the 38's come with screamer pipes pm me

I'll do free shipping and throw in the dump tubes. Gonna be a big heavy box for these items

[BspeedIL82]

With the radiator/fan setup, are the fans pushers or pullers?
Have pics of the oil cooler setup? Where do you have the cooler located exactly? I have the PBM HMIC so am limited on some space/location.
Does the catch can come with the -an lines as well?

[MC.Understeer]

Originally Posted by BspeedIL82

With the radiator/fan setup, are the fans pushers or pullers?
Have pics of the oil cooler setup? Where do you have the cooler located exactly? I have the PBM HMIC so am limited on some space/location.
Does the catch can come with the -an lines as well?

Fans can be either or by switching the polarities, They're not a S blade design or anything.

The oil cooler/relocation kit was mounted infront of the radiator but I believe the lines are long enough to mount off to the side of the intercooler/radiator setup. I'll update this post soon with pics.

[Ka24Power]

Is the manifold twin scroll or just twin wastegate?

[sleeper108]

sell the turbo? still interested...

[MC.Understeer]

Originally Posted by Ka24Power

Is the manifold twin scroll or just twin wastegate?

It's single along with the turbo.

Sleeper I pm'd you. Sorry I forgot about you within the piles of a couple other people on the fence of buying the turbo or kit. My apologies.