S13 R33 Brake Swap Questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ChiTownJDM · 03-23-2015, 02:33 AM

okay quick question for ya'll to run through so i can get a second opinion .
91 240sx coupe . I am trying to do R33 front and rear. have the calipers , brand new pads for a r33 and new rotors for a r33. to put them on a 240 i can use 300zx conversion lines with bajo fittings yes? as long as i copper washer it of-course? and to get these on a 240 i need that bracket for bigger brake set ups yes? front and rear? cause i thought they bolt right up. and before people start saying i don't know what im talking about , i am really knowledgeable in cars and it don't hurt to get a second opinion!

Scott@FontanaNissan · 03-23-2015, 08:55 AM

as long as you are using both matching R33 Calipers and Rotors you don't need any brackets all the brake hardware should bolt right on. the only thing you'll need is to make a couple brackets for the parking brake cables. since you'll need to use 2+2 Z32 parking brake cables. other than that using standard Z32 brake conversion lines and you're set.

-Juan

ChiTownJDM · 03-23-2015, 02:17 PM

Thanks for the reply!

03-23-2015, 02:33 AM	#1
ChiTownJDM Join Date: Apr 2014 Location: chicago Age: 29 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	S13 R33 Brake Swap Questions okay quick question for ya'll to run through so i can get a second opinion . 91 240sx coupe . I am trying to do R33 front and rear. have the calipers , brand new pads for a r33 and new rotors for a r33. to put them on a 240 i can use 300zx conversion lines with bajo fittings yes? as long as i copper washer it of-course? and to get these on a 240 i need that bracket for bigger brake set ups yes? front and rear? cause i thought they bolt right up. and before people start saying i don't know what im talking about , i am really knowledgeable in cars and it don't hurt to get a second opinion!

03-23-2015, 08:55 AM	#2
Scott@FontanaNissan Zilvia Junkie Join Date: Dec 2009 Location: Fontana, CA Posts: 479 Trader Rating: (4) Feedback Score: 4 reviews	as long as you are using both matching R33 Calipers and Rotors you don't need any brackets all the brake hardware should bolt right on. the only thing you'll need is to make a couple brackets for the parking brake cables. since you'll need to use 2+2 Z32 parking brake cables. other than that using standard Z32 brake conversion lines and you're set. -Juan __________________ Juan Vargas - Motorsports Specialist Fontana Nissan/Nissanraceshop.com email: [email protected] Scott's Personal Website/Blog: http://www.scottandkerryann.com

03-23-2015, 02:17 PM	#3
ChiTownJDM Join Date: Apr 2014 Location: chicago Age: 29 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the reply!