Looking for S14a RHD DOOR HARNESSES/SWITCHES

[Nissan2nr22]

Title says it all

Must be kouki ones, not zenki, they are different

RHD

I need harnesses too

No broken stuff please I need good working condition

Located in Florida

If you have 2 RHD complete doors and youre in florida ill pick them up for a good price too

[N3cronomicon]

I have kouki door switches

Also have a hud setup, dcc, triple gauge pod, etc. If youd be interested.

[Nissan2nr22]

inboxedddddddddd

[magermeister]

all you need for a rhd conversion is the switches homie, pull the harnesses and swap the driver one to the new driver side and vice a versa and boom. your good to go, I just did the most flawless FULL silvia conversion in the USA this past spring. check me out on instagram at @magermeister_s14

[Nissan2nr22]

i have usdm harness and jdm harness and both windows don't work i have to criss cross switches from jdm with udsm, pretty sure i need jdm harnesses which are different, if you look at USDM end harness where it plugs into the switch some pins don't have wires where the switch has pins

[magermeister]

Originally Posted by Nissan2nr22

i have usdm harness and jdm harness and both windows don't work i have to criss cross switches from jdm with udsm, pretty sure i need jdm harnesses which are different, if you look at USDM end harness where it plugs into the switch some pins don't have wires where the switch has pins

Shoot me a text at 843-513-9764 bro. I can help you out man. Name is Matthew

[rawgarage]

I have a Zenki driver window switch....text me 9792366891

[Nissan2nr22]

I need kouki, have full kouki wiring harnesses in my car

[EnemyS15]

nm.........................

[Nissan2nr22]

whats up? is that a bump? lol

[rawgarage]

Serious my swap the door harness and your good to go

[Nissan2nr22]

Regular USDM door harnesses on JDM FULL WIRING HARNESS DASH ENGINE BAY ENGINE ECU ETC?

[magermeister]

Originally Posted by Nissan2nr22

Regular USDM door harnesses on JDM FULL WIRING HARNESS DASH ENGINE BAY ENGINE ECU ETC?

That's 110% how mine is. All the wiring is JDM and my door harnesses are USDM Kouki harnesses. Just swapped doors and plugged everything in no problem. Either your car was originally a Zenki or you some how have Zenki wiring for the doors. Either way all Kouki across the board is plug and play I don't care if you got it for the UK, New Zealand, Japan or even Australia. The ONLY time the pinning is different is from a 95 Zenki...

[Nissan2nr22]

I don't see how it could've been zenki because the clip was kouki interior kouki sr and radiator support etc

Ill find someone locally with a different set of stock harnesses see if anything changes