CA Rare 18" Equip 01 18x9+22 18x10.5+22 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Daniel O · 11-04-2015, 01:32 PM

18" Equip 01, 18x9+22 18x10.5+22

Here's your chance to get at some rather rare wheels.

They will fit FD, S13, S14 and 350z/g35.

They clear BBK in the front - I've run them over Z32 in front, AP racing & Z33 Brembos.

CENTERCAPS INCLUDED.

Well worn and ready for a refinish... or run them as they are like I did.

They come with DEAD Federal 595SS. I can pull the tires for shipping if desired (no price change).

Better photos to come...

Asking $2,000 picked up & taking reasonable offers - especially if local. Shipping at your cost.

NOW WILLING TO TRADE

Don't really want to sell them as I'll probably never be able to get another set... had planned on relipping them but another set of dream wheels popped up.

cured13 · 11-04-2015, 06:43 PM

What it takes to fit these bad boys in the rear of the s13?
How much camber, roll or pull and what tire size?

Daniel O · 11-04-2015, 07:03 PM

Height as seen in photo
-3.8* camber
Stock arms
Inner seam weld hammered flush
2-3mm pull & rolled 100% flat
235 Federal 595 SS

No rubbing at all once it was dialed in - very tight fit if you are running essentially no pull like I am.

More pull and more positive camber OR spacer = no hammering.

Daniel O · 11-13-2015, 03:30 PM

Center Caps:

NISR20MO · 11-14-2015, 07:50 AM

Can you PM/text me more detailed pics? Would like to see condition clearly to gauge refinish needs. 9197O467O4 or PM me

Daniel O · 11-14-2015, 07:38 PM

Texted ^.

More photos:

Front #1

Front #2 (worst):

Rear #1 (dusty, no water where they are kept):

Rear #2 (same statement as above):

worst again:

Testing a Meister lip to see if they are the same lips, looks like it but I'm not 100% positive. I can show them together in person if the buyer is picking up so you can judge for yourself.

Daniel O · 11-19-2015, 11:54 AM

I can arrange pickup in Socal over the upcoming holiday weekend if anyone wants to save on shipping

.

vegasS12 · 11-19-2015, 12:26 PM

DAMN sooo tempted!!!!!!!!!!!!!

Daniel O · 12-01-2015, 01:34 PM

Still available...

surx7 · 12-01-2015, 05:22 PM

I'm guessing no interest in trades, as you stated another dream set popped up, but on the off chance... i have a set of weds kranze cerberus 18x10/11 +8 fresh refinish from vr about 500 miles ago.. been trying to snag a set of these for years. lemme know if that peaks your interest.

Daniel O · 12-01-2015, 05:28 PM

Unfortunately the reason I'm selling my collection is that it has outgrown my space (7 spare sets - I'd prefer to store a car instead). Otherwise I wouldn't be selling these wheels at all... Took me a long time to find them.

Cerbs are super cool, can't imagine they'd last too long in those sizes if you were to sell outright.

surx7 · 12-01-2015, 05:36 PM

I have em listed so, if they sell i'll hit you about these for sure. thanks man.

GenkiZenki808 · 12-01-2015, 07:29 PM

Damn. Nice set

Daniel O · 12-08-2015, 04:25 PM

Wish I had the space to keep these but until I can sell a few more things... bump...

Daniel O · 12-14-2015, 01:21 PM

Monday BumpDay

Daniel O · 01-07-2016, 01:39 PM

Post holiday bump. Still no rush to sell these... might try to clean these up in the next month or two.

Daniel O · 01-15-2016, 01:50 PM

To the top.

Daniel O · 01-24-2016, 12:21 PM

Bump, willing to trade for 18" g7c5c2 (full set or pair + cash) or a pair of SP1.

Daniel O · 01-31-2016, 12:00 PM

to the top

Daniel O · 02-04-2016, 12:24 PM

Mid week bump!

Daniel O · 02-15-2016, 10:32 AM

Wanted: A serious buyer :P

Daniel O · 02-28-2016, 09:30 PM

Still have these.

Daniel O · 03-08-2016, 12:43 PM

Wish I had space to keep these...

Daniel O · 03-22-2016, 01:39 PM

to the top

Daniel O · 04-04-2016, 03:18 PM

To the top.

Daniel O · 06-15-2016, 01:10 AM

To the top

Daniel O · 06-26-2016, 11:35 PM

bumpppppppp

Daniel O · 07-06-2016, 01:27 PM

To the top.

Daniel O · 07-28-2016, 04:54 PM

Bi-Monthly bump? lol. Still not in a rush to sell

.

Daniel O · 10-19-2016, 11:13 PM

Willing to trade for track wheels (authentic) + cash on your side or my side depending on the value.

Preferably 17x9.5 +35ish and preferably light, though size/offset is more important than weight. TE37s, Gram Lights 57d, 57dr, TCII, TCIII, LMGT2, etc.

Open to slightly different sizing, offset, weight (ie: 18x9.5, 17x9, +20 through +40, heavier stuff like Meisters, SP1, etc).

11-14-2015, 07:38 PM	#6
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Texted ^. More photos: Front #1 Front #2 (worst): Rear #1 (dusty, no water where they are kept): Rear #2 (same statement as above): worst again: Testing a Meister lip to see if they are the same lips, looks like it but I'm not 100% positive. I can show them together in person if the buyer is picking up so you can judge for yourself. Last edited by Daniel O; 11-19-2015 at 01:10 PM.. Reason: fixed links - again...

11-04-2015, 01:32 PM	#1
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Rare 18" Equip 01 18x9+22 18x10.5+22 18" Equip 01, 18x9+22 18x10.5+22 Here's your chance to get at some rather rare wheels. They will fit FD, S13, S14 and 350z/g35. They clear BBK in the front - I've run them over Z32 in front, AP racing & Z33 Brembos. CENTERCAPS INCLUDED. Well worn and ready for a refinish... or run them as they are like I did. They come with DEAD Federal 595SS. I can pull the tires for shipping if desired (no price change). Better photos to come... Asking $2,000 picked up & taking reasonable offers - especially if local. Shipping at your cost. NOW WILLING TO TRADE Don't really want to sell them as I'll probably never be able to get another set... had planned on relipping them but another set of dream wheels popped up. Last edited by Daniel O; 10-19-2016 at 11:14 PM.. Reason: added trade

11-04-2015, 06:43 PM	#2
cured13 Zilvia Addict Join Date: Apr 2008 Location: Almostthere Posts: 719 Trader Rating: (11) Feedback Score: 11 reviews	What it takes to fit these bad boys in the rear of the s13? How much camber, roll or pull and what tire size?

11-04-2015, 07:03 PM	#3
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Height as seen in photo -3.8* camber Stock arms Inner seam weld hammered flush 2-3mm pull & rolled 100% flat 235 Federal 595 SS No rubbing at all once it was dialed in - very tight fit if you are running essentially no pull like I am. More pull and more positive camber OR spacer = no hammering.

11-13-2015, 03:30 PM	#4
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Center Caps:

11-14-2015, 07:50 AM	#5
NISR20MO Zilvia Junkie Join Date: Aug 2006 Location: Raleigh NC Age: 38 Posts: 490 Trader Rating: (29) Feedback Score: 29 reviews	Can you PM/text me more detailed pics? Would like to see condition clearly to gauge refinish needs. 9197O467O4 or PM me

11-19-2015, 11:54 AM	#7
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	I can arrange pickup in Socal over the upcoming holiday weekend if anyone wants to save on shipping .

11-19-2015, 12:26 PM	#8
vegasS12 Zilvia Junkie Join Date: Sep 2009 Location: las vegas nv. Age: 35 Posts: 477 Trader Rating: (5) Feedback Score: 5 reviews	DAMN sooo tempted!!!!!!!!!!!!!

12-01-2015, 01:34 PM	#9
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Still available...

12-01-2015, 05:22 PM	#10
surx7 Leaky Injector Join Date: Apr 2012 Location: Utah Age: 32 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	I'm guessing no interest in trades, as you stated another dream set popped up, but on the off chance... i have a set of weds kranze cerberus 18x10/11 +8 fresh refinish from vr about 500 miles ago.. been trying to snag a set of these for years. lemme know if that peaks your interest.

12-01-2015, 05:28 PM	#11
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Unfortunately the reason I'm selling my collection is that it has outgrown my space (7 spare sets - I'd prefer to store a car instead). Otherwise I wouldn't be selling these wheels at all... Took me a long time to find them. Cerbs are super cool, can't imagine they'd last too long in those sizes if you were to sell outright.

12-01-2015, 05:36 PM	#12
surx7 Leaky Injector Join Date: Apr 2012 Location: Utah Age: 32 Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	I have em listed so, if they sell i'll hit you about these for sure. thanks man.

12-01-2015, 07:29 PM	#13
GenkiZenki808 Zilvia Junkie Join Date: Jun 2012 Location: Hawaii Posts: 477 Trader Rating: (13) Feedback Score: 13 reviews	Damn. Nice set

12-08-2015, 04:25 PM	#14
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Wish I had the space to keep these but until I can sell a few more things... bump...

12-14-2015, 01:21 PM	#15
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Monday BumpDay

01-07-2016, 01:39 PM	#16
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Post holiday bump. Still no rush to sell these... might try to clean these up in the next month or two.

01-15-2016, 01:50 PM	#17
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	To the top.

01-24-2016, 12:21 PM	#18
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Bump, willing to trade for 18" g7c5c2 (full set or pair + cash) or a pair of SP1.

01-31-2016, 12:00 PM	#19
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	to the top

02-04-2016, 12:24 PM	#20
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Mid week bump!

02-15-2016, 10:32 AM	#21
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Wanted: A serious buyer :P

02-28-2016, 09:30 PM	#22
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Still have these.

03-08-2016, 12:43 PM	#23
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Wish I had space to keep these...

03-22-2016, 01:39 PM	#24
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	to the top

04-04-2016, 03:18 PM	#25
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	To the top.

06-15-2016, 01:10 AM	#26
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	To the top

06-26-2016, 11:35 PM	#27
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	bumpppppppp

07-06-2016, 01:27 PM	#28
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	To the top.

07-28-2016, 04:54 PM	#29
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Bi-Monthly bump? lol. Still not in a rush to sell .

10-19-2016, 11:13 PM	#30
Daniel O Leaky Injector Join Date: Sep 2012 Location: California Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Willing to trade for track wheels (authentic) + cash on your side or my side depending on the value. Preferably 17x9.5 +35ish and preferably light, though size/offset is more important than weight. TE37s, Gram Lights 57d, 57dr, TCII, TCIII, LMGT2, etc. Open to slightly different sizing, offset, weight (ie: 18x9.5, 17x9, +20 through +40, heavier stuff like Meisters, SP1, etc).