Head gasket for KA24e 90mm? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wrxsr20 · 03-13-2016, 07:41 PM

Hey guys I'm shopping for parts for my engine rebuild and I'm going with 89.5 Arais pistons so I'll have to bore my head nut here's the problem, I can't find any head gaskets that will compensate for a ka24e bored to 89.5. I found some for the ka24DE but to my understanding they don't fit on the single cam.

mewantkouki · 03-13-2016, 08:04 PM

They fit, cut the timing cover area off and use RTV to seal the front covers.

wrxsr20 · 03-14-2016, 06:32 PM

Quote:

Originally Posted by mewantkouki

They fit, cut the timing cover area off and use RTV to seal the front covers.

Are you 100% sure?
So if I got this http://www.autohance.com/cometic-c42...FReUfgodRm8EEA It will work on my SOHC bored to 90mm?

03-13-2016, 07:41 PM	#1
wrxsr20 Leaky Injector Join Date: Nov 2013 Location: vegas Age: 34 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	Head gasket for KA24e 90mm? Hey guys I'm shopping for parts for my engine rebuild and I'm going with 89.5 Arais pistons so I'll have to bore my head nut here's the problem, I can't find any head gaskets that will compensate for a ka24e bored to 89.5. I found some for the ka24DE but to my understanding they don't fit on the single cam.

03-13-2016, 08:04 PM	#2
mewantkouki Zilvia FREAK! Join Date: Nov 2007 Location: Orlando, Fl Age: 38 Posts: 1,250 Trader Rating: (36) Feedback Score: 36 reviews	They fit, cut the timing cover area off and use RTV to seal the front covers.