Xcessive Manufacturing 2jz engine mount swap kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

phantom snail · 05-11-2016, 05:04 PM

Hi guys,
editing this post a touch now as I have decided to go with the XM mounts since clearance with bonnet / hood does not seem to be an issue

Next question is - what sway bar are you 2jz XM mount swapped fellas running?

motor - 2jz
chassis - s14
mounts - xcessive manufacturing
issue - what sway bar are you guys running

So I've read that some people are having clearance issues with the stock sway bar and some aren't ..
Roll call on those who have been able to run stock sway bars with the front sump 2jz vvti without having to notch the sump?
Whats the best aftermarket sway bar available? From experience, thicker is not always better ... so some bars may offer better handling than others pending design and thickness .. any input is greatly appreciated
And those who run aftermarket front sway bars, what have you done with regards to the rear sway bar to balance out the front 'upgrade'?

Thanks for the help guys!

kashira kureijii · 05-11-2016, 05:44 PM

its called a hood you silly aussie!
pfft bonnet
what are you? Amish ?

Veltall · 05-11-2016, 05:58 PM

i have a 1jz vvti in a s13 using their brackets and my hood closes fine. using the OEM nissan mounts. i can't imagine the s14 ones to be TOO different

ChrisS14209 · 05-11-2016, 06:15 PM

Im using their mounts with Nismo mounts on my 1jz VVti in a S14 and clears perfectly.

phantom snail · 05-11-2016, 07:56 PM

Quote:

Originally Posted by kashira kureijii

its called a hood you silly aussie!
pfft bonnet
what are you? Amish ?

haha hood / bonnet - same same

Quote:

Originally Posted by Veltall

i have a 1jz vvti in a s13 using their brackets and my hood closes fine. using the OEM nissan mounts. i can't imagine the s14 ones to be TOO different

Quote:

Originally Posted by ChrisS14209

Im using their mounts with Nismo mounts on my 1jz VVti in a S14 and clears perfectly.

this is great news guys ... the more ppl who can chime in and agree on successful clearances, the more confident I am ..

I don't think transmission choice would affect bonnet / hood clearance - in any case, I will be running a cd009

RB25GUY · 05-12-2016, 05:10 AM

Quote:

Originally Posted by kashira kureijii

its called a hood you silly aussie!
pfft bonnet
what are you? Amish ?

"Look at the scoop on that Bonnet" Jeremy Clarkson

phantom snail · 05-13-2016, 06:33 PM

Have bit the bullet and gone the xcessive mounts .. will let u guys know how I go

wiring specialties · 05-16-2016, 07:43 AM

Rich over at Xcessive makes a killer product, I ran his mounts,plenums etc on a few builds.

phantom snail · 05-16-2016, 06:00 PM

Original post has been slightly modified

Info / experience greatly appreciated guys

wiring specialties · 05-17-2016, 07:35 AM

I ran the Sikky sway bar and it worked perfectly.

http://www.sikky.com/product/s14-240sx-front-sway-bar/

240drew · 08-08-2016, 10:20 PM

Just searching and decided to dig up a slightly old thread. I too have xcessive mount brackets and their series 15 urethane mounts.
Mounted my 2jzgte vvti in the car two weekends ago.
It fits however very snug, rubs on the sway bar. I have already ordered a sikky front sway bar to remedy this.
I can say they look like they will be very functional. The only other gripe i have is without some form of modification hood closure with the factory twins is pretty much impossible. I think I will end up needing hood spacers. Not the look I was going for but if its what is needed so be it.

P.S. wiringspecialties lets get those 2j vvti harnesses out! I am waiting on yall. Never done me wrong out of the 3 harnesses that I have bought from you guys always a quality product.

240drew · 08-08-2016, 10:55 PM

After a bit more diagnosing. The hood is in no way going to close properly without modification to the hood, and some sort of spacer in the rear. Or going single turbo. Kind of a bit disappointed at this point. I purchased mounts/mount brackets, shifter extension for the r154, transmission mount and driveshaft from them and to have it not fit seems a bit like I bought the "cheap stuff off ebay" than from a reputable company. I have already emailed them we will see what comes of it. I will post pictures whenever I have a chance to detail what is contacting where.

240drew · 08-09-2016, 09:38 AM

Update: Received an email back from Cassie PartsChick at xcessive. When I originally sent the email to them in regards to ordering the mounts I assumed incorrectly that I would be sent the Series 15 mounts they advertise for the JZ swap's on their website. I was invoiced and charged for the OEM replacement urethane mounts. Series 3. which are according to the website 3/8" taller. Not sure if thats going to fix the issue but we will see.

I don't want anyone to think I dislike Xcessive, they are a great company to deal with and would absolutely plan to do business with again. Customer service is top notch and email response time is easily less then 12 hours.
I just am trying to give an honest review on their mounts.

05-11-2016, 05:04 PM	#1
phantom snail Join Date: Aug 2014 Location: Sydney Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Xcessive Manufacturing 2jz engine mount swap kit - what sway bar Hi guys, editing this post a touch now as I have decided to go with the XM mounts since clearance with bonnet / hood does not seem to be an issue Next question is - what sway bar are you 2jz XM mount swapped fellas running? motor - 2jz chassis - s14 mounts - xcessive manufacturing issue - what sway bar are you guys running So I've read that some people are having clearance issues with the stock sway bar and some aren't .. Roll call on those who have been able to run stock sway bars with the front sump 2jz vvti without having to notch the sump? Whats the best aftermarket sway bar available? From experience, thicker is not always better ... so some bars may offer better handling than others pending design and thickness .. any input is greatly appreciated And those who run aftermarket front sway bars, what have you done with regards to the rear sway bar to balance out the front 'upgrade'? Thanks for the help guys! Last edited by phantom snail; 05-16-2016 at 05:59 PM..

05-11-2016, 06:15 PM	#4
ChrisS14209 Zilvia Junkie Join Date: Jul 2009 Location: Turlock Posts: 407 Trader Rating: (6) Feedback Score: 6 reviews	Im using their mounts with Nismo mounts on my 1jz VVti in a S14 and clears perfectly. __________________ 1997 Nissan 240sx

05-16-2016, 07:43 AM	#8
wiring specialties Zilvia Junkie Join Date: Sep 2011 Location: Brookfield Posts: 398 Trader Rating: (3) Feedback Score: 3 reviews	Rich over at Xcessive makes a killer product, I ran his mounts,plenums etc on a few builds. __________________ Visit our Website - Check out our Blog - Like us on Facebook - Follow us on Instagram

05-17-2016, 07:35 AM	#10
wiring specialties Zilvia Junkie Join Date: Sep 2011 Location: Brookfield Posts: 398 Trader Rating: (3) Feedback Score: 3 reviews	I ran the Sikky sway bar and it worked perfectly. http://www.sikky.com/product/s14-240sx-front-sway-bar/ __________________ Visit our Website - Check out our Blog - Like us on Facebook - Follow us on Instagram

05-11-2016, 05:58 PM	#3
Veltall Zilvia Member Join Date: Oct 2008 Location: where its 0 degrees all day, everyday Posts: 269 Trader Rating: (4) Feedback Score: 4 reviews	i have a 1jz vvti in a s13 using their brackets and my hood closes fine. using the OEM nissan mounts. i can't imagine the s14 ones to be TOO different

05-13-2016, 06:33 PM	#7
phantom snail Join Date: Aug 2014 Location: Sydney Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Have bit the bullet and gone the xcessive mounts .. will let u guys know how I go

05-16-2016, 06:00 PM	#9
phantom snail Join Date: Aug 2014 Location: Sydney Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Original post has been slightly modified Info / experience greatly appreciated guys

08-08-2016, 10:20 PM	#11
240drew Leaky Injector Join Date: Aug 2009 Location: IRMO, SC Age: 33 Posts: 126 Trader Rating: (10) Feedback Score: 10 reviews	Just searching and decided to dig up a slightly old thread. I too have xcessive mount brackets and their series 15 urethane mounts. Mounted my 2jzgte vvti in the car two weekends ago. It fits however very snug, rubs on the sway bar. I have already ordered a sikky front sway bar to remedy this. I can say they look like they will be very functional. The only other gripe i have is without some form of modification hood closure with the factory twins is pretty much impossible. I think I will end up needing hood spacers. Not the look I was going for but if its what is needed so be it. P.S. wiringspecialties lets get those 2j vvti harnesses out! I am waiting on yall. Never done me wrong out of the 3 harnesses that I have bought from you guys always a quality product.

08-08-2016, 10:55 PM	#12
240drew Leaky Injector Join Date: Aug 2009 Location: IRMO, SC Age: 33 Posts: 126 Trader Rating: (10) Feedback Score: 10 reviews	After a bit more diagnosing. The hood is in no way going to close properly without modification to the hood, and some sort of spacer in the rear. Or going single turbo. Kind of a bit disappointed at this point. I purchased mounts/mount brackets, shifter extension for the r154, transmission mount and driveshaft from them and to have it not fit seems a bit like I bought the "cheap stuff off ebay" than from a reputable company. I have already emailed them we will see what comes of it. I will post pictures whenever I have a chance to detail what is contacting where.

08-09-2016, 09:38 AM	#13
240drew Leaky Injector Join Date: Aug 2009 Location: IRMO, SC Age: 33 Posts: 126 Trader Rating: (10) Feedback Score: 10 reviews	Update: Received an email back from Cassie PartsChick at xcessive. When I originally sent the email to them in regards to ordering the mounts I assumed incorrectly that I would be sent the Series 15 mounts they advertise for the JZ swap's on their website. I was invoiced and charged for the OEM replacement urethane mounts. Series 3. which are according to the website 3/8" taller. Not sure if thats going to fix the issue but we will see. I don't want anyone to think I dislike Xcessive, they are a great company to deal with and would absolutely plan to do business with again. Customer service is top notch and email response time is easily less then 12 hours. I just am trying to give an honest review on their mounts.