350z seats in s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

grudge · 06-28-2005, 12:39 PM

has anyone put 350z seats in their s14? if so any comments?

justinhustle · 06-28-2005, 01:37 PM

3/4 bolts line up

i sold a few sets last summer

its a decent option for a budget

raen419 · 06-28-2005, 02:11 PM

3 of the 4 bolts line up? hm....
i could make custom brackets to fit the other bolt to the existing hole....

if only i wasn't moving off for school, and not having to save every dime lately....

grudge · 06-28-2005, 03:11 PM

could i still use my own bracket or would i have to use the 350z bracket?

raen419 · 06-28-2005, 03:17 PM

use 350z bracket.
mod the bracket end where the bolt that doesn't line up.
should be too hard really.

if anything, have a machine shop cut/weld for you.

TurDz · 06-28-2005, 03:50 PM

Can anyone compare 350Z seats to other models such as Bride, Sparco, OEM Skyline, etc?

I've sat in 350Z seats and they are too big (wide) for me. heheh...

grudge · 06-28-2005, 04:14 PM

if i can't use the 350z brakets, do i have any other options? i don't think my boy will let me use his cause he's still using his stock bracket for his new seats. does this mean im screwed then? that suks.

trackstar · 06-29-2005, 06:00 AM

Quote:

Originally Posted by grudge

if i can't use the 350z brakets, do i have any other options? i don't think my boy will let me use his cause he's still using his stock bracket for his new seats. does this mean im screwed then? that suks.

Just buy some brackets from the dealer.

Anyone know how the seats fit (headroom, width) in an S13?

DRFT180 · 06-29-2005, 09:16 AM

^^I have the same question, has anyone ever put them in an S13?

frozencoconutz · 06-29-2005, 10:33 AM

Quote:

Originally Posted by justinhustle

3/4 bolts line up

i sold a few sets last summer

its a decent option for a budget

are we just takling about the drivers side? or also the passenger side?

drnovascotia · 06-29-2005, 08:59 PM

Umm, if the s13 and the s14 have the EXACT SAME MOUNTS, why would you be asking this question ? If you can bolt a s14 seat into a s13, don't you think then that 3 of the 4 would line up on the s13?

Dr.

DRFT180 · 06-29-2005, 10:26 PM

An S14 seat in an S13, actually only 3 of the 4 bolts line up from on the driver side. The passenger side bolts right in. The front left bolt does not line up with the S14 seat.

Dousan_PG · 06-29-2005, 10:49 PM

Quote:

Originally Posted by DRFT180

An S14 seat in an S13, actually only 3 of the 4 bolts line up from on the driver side. The passenger side bolts right in. The front left bolt does not line up with the S14 seat.

you proved
1) either your a moron
2) your car is a POS

s14 fits in s13 PERFECT
ive done it soo many times on friends cars and 2 of my cars (2 s13s)
and s15 fits perfect too

sooooooo many folks i know have s14 seats i ntheir car and it fits PERFECT

your car is f'd up.

drew935 · 06-29-2005, 11:37 PM

Quote:

Originally Posted by Dousan_PG

you proved
1) either your a moron
2) your car is a POS

s14 fits in s13 PERFECT
ive done it soo many times on friends cars and 2 of my cars (2 s13s)
and s15 fits perfect too

sooooooo many folks i know have s14 seats i ntheir car and it fits PERFECT

your car is f'd up.

+1

The message you have entered is too short. Please lengthen your message to at least 10 characters.

frozencoconutz · 06-29-2005, 11:37 PM

Quote:

Originally Posted by drnovascotia

Umm, if the s13 and the s14 have the EXACT SAME MOUNTS, why would you be asking this question ? If you can bolt a s14 seat into a s13, don't you think then that 3 of the 4 would line up on the s13?

Dr.

why did i ask that question? simply because I DONT KNOW. but thanks for the input. now let me ask you this....do you always end your posts with Dr?....

frozen....

raen419 · 06-29-2005, 11:51 PM

i have s14 seat in my hatch, they line up fine.
and it's my 2nd pair of seats....so i don't see the issue....
all 4 bolts are bolted in too....imagine that....

Drunk Bastard · 06-30-2005, 03:06 AM

so 350z seats in a s14 is cool...but what about 350z motor???

reefer1114 · 06-30-2005, 03:26 AM

wasnt it motorex that swapped a sr20det in a z33 for their drift car?

Dousan_PG · 06-30-2005, 10:46 AM

more like chris forsberg did then signal copied it.
chris drove for motorex for a while too
chris still drives the car
HE built it, HE drives it. not some company car. his personal car. and a sr was swapped in because the supercharger blew up the motor.

06-28-2005, 12:39 PM	#1
grudge Zilvia Member Join Date: Jun 2005 Location: san diego Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	350z seats in s14 has anyone put 350z seats in their s14? if so any comments?

06-30-2005, 10:46 AM	#19
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	more like chris forsberg did then signal copied it. chris drove for motorex for a while too chris still drives the car HE built it, HE drives it. not some company car. his personal car. and a sr was swapped in because the supercharger blew up the motor. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

06-28-2005, 01:37 PM	#2
justinhustle Nissanaholic! Join Date: Mar 2003 Location: ohio Age: 45 Posts: 1,693 Trader Rating: (0) Rides Gallery: justinhustle Feedback Score: 0 reviews	3/4 bolts line up i sold a few sets last summer its a decent option for a budget

06-28-2005, 02:11 PM	#3
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 42 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	3 of the 4 bolts line up? hm.... i could make custom brackets to fit the other bolt to the existing hole.... if only i wasn't moving off for school, and not having to save every dime lately....

06-28-2005, 03:11 PM	#4
grudge Zilvia Member Join Date: Jun 2005 Location: san diego Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	could i still use my own bracket or would i have to use the 350z bracket?

06-28-2005, 03:17 PM	#5
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 42 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	use 350z bracket. mod the bracket end where the bolt that doesn't line up. should be too hard really. if anything, have a machine shop cut/weld for you.

06-28-2005, 03:50 PM	#6
TurDz Nissanaholic! Join Date: May 2003 Location: Bay Area, CA Posts: 1,618 Trader Rating: (0) Feedback Score: 0 reviews	Can anyone compare 350Z seats to other models such as Bride, Sparco, OEM Skyline, etc? I've sat in 350Z seats and they are too big (wide) for me. heheh...

06-28-2005, 04:14 PM	#7
grudge Zilvia Member Join Date: Jun 2005 Location: san diego Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	if i can't use the 350z brakets, do i have any other options? i don't think my boy will let me use his cause he's still using his stock bracket for his new seats. does this mean im screwed then? that suks.

06-29-2005, 09:16 AM	#9
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 656 Trader Rating: (7) Feedback Score: 7 reviews	^^I have the same question, has anyone ever put them in an S13?

06-29-2005, 08:59 PM	#11
drnovascotia Leaky Injector Join Date: Mar 2003 Location: NH Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	Umm, if the s13 and the s14 have the EXACT SAME MOUNTS, why would you be asking this question ? If you can bolt a s14 seat into a s13, don't you think then that 3 of the 4 would line up on the s13? Dr.

06-29-2005, 10:26 PM	#12
DRFT180 Zilvia Addict Join Date: Nov 2003 Location: Louisiana Posts: 656 Trader Rating: (7) Feedback Score: 7 reviews	An S14 seat in an S13, actually only 3 of the 4 bolts line up from on the driver side. The passenger side bolts right in. The front left bolt does not line up with the S14 seat.

06-29-2005, 11:51 PM	#16
raen419 Zilvia Member Join Date: Jul 2003 Location: Jasper, AL Age: 42 Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	i have s14 seat in my hatch, they line up fine. and it's my 2nd pair of seats....so i don't see the issue.... all 4 bolts are bolted in too....imagine that....

06-30-2005, 03:06 AM	#17
Drunk Bastard Zilvia FREAK! Join Date: Nov 2003 Posts: 1,405 Trader Rating: (2) Feedback Score: 2 reviews	so 350z seats in a s14 is cool...but what about 350z motor???

06-30-2005, 03:26 AM	#18
reefer1114 Zilvia Addict Join Date: Dec 2004 Location: in your womans pants Posts: 638 Trader Rating: (0) Feedback Score: 0 reviews	wasnt it motorex that swapped a sr20det in a z33 for their drift car?