Hopefully you all can answer a few questions on - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ballistic-Mobile.com · 03-26-2002, 04:30 PM

I will be purchasing as 89-93 240sx and i absolutely must have everything in front of the windshield to look like this...

I know this isn't the best question to ask but can anyone tell me what all i need to get?
I know i will need a new hood, lights, bumper, grill, and fenders, but i don't know which ones these are. All help will be appretiated and not forgotten.
If i could get the following information i will be a very happy man...Exact name of item, were it can be bought and an estimated price.

Okay that wasn't so bad. I also want to run a dual exhaust system w/ two factory or aftermarket exhausts that are almost as quite as a stock muffler. I live in an area of town w/ very close living courters and i don't want to be a the kind of asshole who lives next to me (very ugly early ninties carmaro with a loud V8 w/ dual straight pipes, waking up at 6am and comming home at 2am sometimes rumbling away and waking me up everymorning) also i dont want the added attraction i would get from police officers. So hopefully someone knows of a, single aftermarket exhaust or dual system, that is quite and will be able to flow enough for a very boosted KA24DE-T. In oder to do this i must have a rear bumper/valince that supports dual exhaust and still looks very agressive yet subtle. I haven't decided on sideskirts yet but the rear bumper/valince must flow w/ the front bumper in the image.

Thanks and SPEED SAFELY!!!

Kid Zelda · 03-26-2002, 04:47 PM

Ok so you want to make your 89-94 240sx look like a 97-98 240sx.

You need, 97 240sx fenders, hood, lights, rad' support, the bumper in the picture is a JDM aero bumper from the S14 Silvia, and the turn signals too, 97 240sx side skirts .. will need to be custom fitted on the 89-94 240sx being hatchback or coupe.
Thats all I feel like answering.
maybe more later

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>

Ballistic-Mobile.com · 03-27-2002, 07:53 AM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Kid Zelda @ Mar. 26 2002,5:47)</td></tr><tr><td id="QUOTE">Ok so you want to make your 89-94 240sx look like a 97-98 240sx.

You need, 97 240sx fenders, hood, lights, rad' support, the bumper in the picture is a JDM aero bumper from the S14 Silvia, and the turn signals too, 97 240sx side skirts .. will need to be custom fitted on the 89-94 240sx being hatchback or coupe.
Thats all I feel like answering.
maybe more later

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'></td></tr></table><span id='postcolor'>
Huh, i had no idea the 97-98 240sx looked so f-ing sweet.  So all the parts i need for the conversion are stock on the USDM 240, except the bumper?  Thanks for the help

Does anyone have any ideas about a dual exhaust system and rear bumper?

luey02 · 03-27-2002, 08:24 AM

Newbies just want everything their way dont they...  I was like that too..  

for the exhaust system, all aftermarket performance catback are loud.  Loud is because the large diameter of piping and large diameter is for better flow.  You can't have good flow and no noise..  you can add a silencer to them, but then you still lose some performance.  Rear bumper dont hold up exhausts, so you can get any kind you want.

Ballistic-Mobile.com · 03-28-2002, 10:17 PM

I have been thinking a bit and will most likely be getting two corvette or two 300zxtt mufflers and and trying to run a dual exhaust looking similar to the 300zx rear.  I am quite sure that there are notches cut out of the rear bumper for the exhaust pipes to pertude through.  I am guessing that the two mentioned mufflers will be able to flow just as much as a 3" muffler.  I will most likely be doing something similar to this...3" down pipe, possibly two high flow cats, specially fabricated 3" to dual 2" piping until the mufflers.  If this seems like it would be too difficult or impossible, please enlighten me.  If there are no bumpers for 240's that have two notches cut out, then will a 300zx bumper fit on a s13?  I might also want to the exhaust pipes be inclosed in the rear bumper/valince, similar to, ahhh mind is blank, well i have seen it before.
thanks

03-27-2002, 08:24 AM	#4
luey02 Zilvia Junkie Join Date: Jan 2002 Posts: 519 Trader Rating: (0) Feedback Score: 0 reviews	Newbies just want everything their way dont they...  I was like that too..   for the exhaust system, all aftermarket performance catback are loud.  Loud is because the large diameter of piping and large diameter is for better flow.  You can't have good flow and no noise..  you can add a silencer to them, but then you still lose some performance.  Rear bumper dont hold up exhausts, so you can get any kind you want. __________________ K. Lu

03-26-2002, 04:30 PM	#1
Ballistic-Mobile.com Leaky Injector Join Date: Mar 2002 Posts: 80 Trader Rating: (0) Feedback Score: 0 reviews	I will be purchasing as 89-93 240sx and i absolutely must have everything in front of the windshield to look like this... I know this isn't the best question to ask but can anyone tell me what all i need to get? I know i will need a new hood, lights, bumper, grill, and fenders, but i don't know which ones these are. All help will be appretiated and not forgotten. If i could get the following information i will be a very happy man...Exact name of item, were it can be bought and an estimated price. Okay that wasn't so bad. I also want to run a dual exhaust system w/ two factory or aftermarket exhausts that are almost as quite as a stock muffler. I live in an area of town w/ very close living courters and i don't want to be a the kind of asshole who lives next to me (very ugly early ninties carmaro with a loud V8 w/ dual straight pipes, waking up at 6am and comming home at 2am sometimes rumbling away and waking me up everymorning) also i dont want the added attraction i would get from police officers. So hopefully someone knows of a, single aftermarket exhaust or dual system, that is quite and will be able to flow enough for a very boosted KA24DE-T. In oder to do this i must have a rear bumper/valince that supports dual exhaust and still looks very agressive yet subtle. I haven't decided on sideskirts yet but the rear bumper/valince must flow w/ the front bumper in the image. Thanks and SPEED SAFELY!!!

03-26-2002, 04:47 PM	#2
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0) Feedback Score: 0 reviews	Ok so you want to make your 89-94 240sx look like a 97-98 240sx. You need, 97 240sx fenders, hood, lights, rad' support, the bumper in the picture is a JDM aero bumper from the S14 Silvia, and the turn signals too, 97 240sx side skirts .. will need to be custom fitted on the 89-94 240sx being hatchback or coupe. Thats all I feel like answering. maybe more later <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>

03-27-2002, 07:53 AM	#3
Ballistic-Mobile.com Leaky Injector Join Date: Mar 2002 Posts: 80 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Kid Zelda @ Mar. 26 2002,5:47)</td></tr><tr><td id="QUOTE">Ok so you want to make your 89-94 240sx look like a 97-98 240sx. You need, 97 240sx fenders, hood, lights, rad' support, the bumper in the picture is a JDM aero bumper from the S14 Silvia, and the turn signals too, 97 240sx side skirts .. will need to be custom fitted on the 89-94 240sx being hatchback or coupe. Thats all I feel like answering. maybe more later <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'></td></tr></table><span id='postcolor'> Huh, i had no idea the 97-98 240sx looked so f-ing sweet.  So all the parts i need for the conversion are stock on the USDM 240, except the bumper?  Thanks for the help Does anyone have any ideas about a dual exhaust system and rear bumper?

03-28-2002, 10:17 PM	#5
Ballistic-Mobile.com Leaky Injector Join Date: Mar 2002 Posts: 80 Trader Rating: (0) Feedback Score: 0 reviews	I have been thinking a bit and will most likely be getting two corvette or two 300zxtt mufflers and and trying to run a dual exhaust looking similar to the 300zx rear.  I am quite sure that there are notches cut out of the rear bumper for the exhaust pipes to pertude through.  I am guessing that the two mentioned mufflers will be able to flow just as much as a 3" muffler.  I will most likely be doing something similar to this...3" down pipe, possibly two high flow cats, specially fabricated 3" to dual 2" piping until the mufflers.  If this seems like it would be too difficult or impossible, please enlighten me.  If there are no bumpers for 240's that have two notches cut out, then will a 300zx bumper fit on a s13?  I might also want to the exhaust pipes be inclosed in the rear bumper/valince, similar to, ahhh mind is blank, well i have seen it before. thanks