![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Join Date: Mar 2004
Location: north carolina
Age: 50
Posts: 23
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
ecu compatabilities.
ok, heres the deal, i have an s14 kouki sr20det, ecu is bad, melted an injector wire, and shorted the circuit that controls my #4 injector. so ive found a guy selling an s14 ecu, but it isnt an exact match, and i dont know if it will work, can you guys help me out a bit?
heres the info on my ecu. NA 23710 80f00 a18-f01 g08 now, heres his ecu info. S14 97-98 sr20det ecu #J4 23710-60f07 A18-F81 GB1 what would be the big difference here? it seems if its a kouki sr20det it should be compatable right? |
![]() |
![]() |
Sponsored Links |
![]() |
#2 | |
Zilvia Addict
![]() Join Date: Nov 2003
Location: Bay Area, CA
Age: 42
Posts: 635
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
The ONLY ecu you can use is "NA". WC will not work, neither will J4. I believe J4 is a blacktop s13 sr20det kouki... not s14. PM me, I may know a person who has an extra ECU |
|
![]() |
![]() |
![]() |
#8 |
Leaky Injector
![]() |
I have the same problem too, I happen to have kouki SR20DET from auto. I have the WC ECU but told that this will not work. It is hard to find NA ECU so I might just end up getting a zenki harness and hopefully that will work with my WC ECU.
|
![]() |
![]() |
![]() |
#9 |
Zilvia Member
![]() Join Date: Nov 2005
Location: San Jose, CA
Age: 42
Posts: 178
Trader Rating: (0)
![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
Yup if you get the zenki s14sr wiring harness, it will work. But what a PITA.
IMO I'd wait til you find a "NA" ecu. They come up on eBay from time to time like rps13 said. Good luck ! |
![]() |
![]() |
![]() |
#10 | |
Leaky Injector
![]() |
Quote:
http://www.zilvia.net/f/showthread.p...et+kouki+zenki I do notice though that the MAF plug is different than my KA and that the oil pressure sender connector is white, which some said for the pressure sensor. I also heard that the kouki has 440cc injector but mine is definitely purple top, just like other zenki I have seen. To make matters worse, I do not have kouki service manual so I cannot compare what is exactly the wiring differences. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|