3200 rev limit

[ultraDorksGarage]

i just converted my sr from a haltech e6x to a e11v2

i searched, and didnt find much, so id like to document my experience with u all for future reference


i had this odd rev limit @exactly 3150-3200, load or no load, it was rev limited, other than that car ran perfectly,(some hesitation on starting, but hell i hadnt done any tuning with the 3 bar map i was running, on e6x i was using 1.5bar map). timing seemed to hold steady too, until of course the odd miss, that actually didnt make car die, just kept it at 3200.(i locked the timing with the haltech @15 for diagnostic purposes)

neways, talking with haltech, i determined my wiring was good. after my second CAS(sensor section only) and second set of ignition modules(hueco dual channels), i decided to bite the bullet and order a whole cas, basically noone sells the stock trigger disk at a reasonable price.


anyway, car runs perfect now, and all it was was thatshiny piece of metal in the cas that caused me a whole lot of, dare i say, honda civic driving><

god i hate hondas><