Garrett turbo question

[S14DB]

Originally Posted by DonDeago

What would be the difference in the normal 3071R? Thats exactly what it is too, in that picture you showed.

Basically the turbine wheel is trimmed to fit in a bored out T2 Housing. The housing is the same one as on the 2871R yet bored to stuff the 56.5mm wheel in. This is the biggest wheel you can fit in a T2 housing. The normal 60mm would hit the wastegate.

3071R-WG
Turbine
-Wheel: 56.5mm w/ 84 trim
-Housing: 0.64 a/r
-Internally Wastegated (No Actuator)
-Maps: Not Available

Compressor
-Wheel: 71mm w/ 56 trim
-Housing: .50 a/r
-Maps: Not Available
-Inlet: 2.75"
http://www.atpturbo.com/Merchant2/me...egory_Code=GRT

3071R
Turbine
-Wheel: 60mm w/ 84 trim
-Housing: .63 ar, .82 ar, 1.06 ar

Compressor
-Wheel: 71mm w/ 56 trim
-Housing: .50 ar
http://www.atpturbo.com/Merchant2/me...egory_Code=GRT