rotor rubbing caliper after 5lug - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

khoadogg · 02-27-2007, 09:52 AM

I just finished 5lug on my S13. Used aftermarket hubs with S13 calipers. I'm running pads and rotors from a '98 S14 SE and now the rotors are rubbing. I had to remove the shims but they still rub. Is this common? Did I use the wrong parts?

Should I just start shaving down the inner caliper? It's rubbing the edge of the rotor because there doesn't seem to be enough room, the rotor is too thick in diameter and width.

What should I do?

02-27-2007, 09:52 AM	#1
khoadogg Nissanaholic! Join Date: Oct 2003 Location: San Jose, CA Age: 41 Posts: 2,423 Trader Rating: (11) Feedback Score: 11 reviews	rotor rubbing caliper after 5lug I just finished 5lug on my S13. Used aftermarket hubs with S13 calipers. I'm running pads and rotors from a '98 S14 SE and now the rotors are rubbing. I had to remove the shims but they still rub. Is this common? Did I use the wrong parts? Should I just start shaving down the inner caliper? It's rubbing the edge of the rotor because there doesn't seem to be enough room, the rotor is too thick in diameter and width. What should I do? __________________ AIM SoarinStrong[B]STRONG 6iX[B] RB single turbo ///Work AMKREAD 180sx

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode