Question about Nismo Extended Studs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

95KA-Turbo · 05-01-2008, 10:29 PM

I did search this but couldn't find an answer to my particular question.

From what I could find stock studs are between 40-42mm long. Basically does anyone run 60mm Nismo studs with 20mm slip on spacers? I have some Ichiba 20mm spacers and am not particularly happy with the quality of the studs themselves (I actually had two lug nuts seize to the studs and had to break them off). I didn't measure them before I put them on, but they are ~20mm bigger then the OEM ones.

It would be a lot more cost efficient to buy some Nismo 60mm studs then to rip off these spacers and buy stock studs, then 20mm bolt on spacers.

Again, my question in the short version is: Can I safely run 20mm slip on spacers with 60mm Nismo studs?

Thank you.

05-01-2008, 10:29 PM	#1
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 39 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	Question about Nismo Extended Studs I did search this but couldn't find an answer to my particular question. From what I could find stock studs are between 40-42mm long. Basically does anyone run 60mm Nismo studs with 20mm slip on spacers? I have some Ichiba 20mm spacers and am not particularly happy with the quality of the studs themselves (I actually had two lug nuts seize to the studs and had to break them off). I didn't measure them before I put them on, but they are ~20mm bigger then the OEM ones. It would be a lot more cost efficient to buy some Nismo 60mm studs then to rip off these spacers and buy stock studs, then 20mm bolt on spacers. Again, my question in the short version is: Can I safely run 20mm slip on spacers with 60mm Nismo studs? Thank you. __________________ Instagram - SJKnoop

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode