Urgent help needed!! Info PLEASE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BlueSix · 09-27-2001, 10:31 AM

Hey, I am wiring in a honda S2000 starter button, and I need to make sure that I have the wiring right.. I have a 1992 Fastback SE, and I am using the instructions from a Miata site ( http://www.miata.net/garage/pushstart/ ) and I've gotten everything done except splicing into my ignition, since Nissans are obviously different than Mazdas... I have called a few places and gotten some info but I need to be SURE before I go cutting up my ignition wires...  

Anyway, here are the 5 wires that I have coming from my ignition and what I think they are....

Black-White stripe: Starter
Black-Green stripe: <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>???
Black-Yellow stripe: Ignition??
Blue (Solid): Accessories
White-Red Stripe: Constant power

If you read the miata page you will be able to see what I am looking for (It said I needed to splice into the ST and IG2 wires)

I am also confused since the guys who told me what most of those are had Black with a RED stripe listed for ignition, which I *dont* have...

Can anyone PLEASE help me figure this out??  I really want to get my button wired up!

If you wanna see pics of my car, including the S2000 button install, go to
http://www.wickednet.org/forums....p>Gimme some opinions on it too if you want!

Thanks in advance for any help!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-27-2001, 10:31 AM	#1
BlueSix Zilvia Member Join Date: Sep 2001 Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	Hey, I am wiring in a honda S2000 starter button, and I need to make sure that I have the wiring right.. I have a 1992 Fastback SE, and I am using the instructions from a Miata site ( http://www.miata.net/garage/pushstart/ ) and I've gotten everything done except splicing into my ignition, since Nissans are obviously different than Mazdas... I have called a few places and gotten some info but I need to be SURE before I go cutting up my ignition wires...   Anyway, here are the 5 wires that I have coming from my ignition and what I think they are.... Black-White stripe: Starter Black-Green stripe: <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>??? Black-Yellow stripe: Ignition?? Blue (Solid): Accessories White-Red Stripe: Constant power If you read the miata page you will be able to see what I am looking for (It said I needed to splice into the ST and IG2 wires) I am also confused since the guys who told me what most of those are had Black with a RED stripe listed for ignition, which I dont have... Can anyone PLEASE help me figure this out??  I really want to get my button wired up! If you wanna see pics of my car, including the S2000 button install, go to http://www.wickednet.org/forums....p>Gimme some opinions on it too if you want! Thanks in advance for any help!!