Injector power wire, where is it?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

invain · 01-01-2009, 06:57 PM

Yeah just ran through the guide in the fsm and checked all the connections. No dice.

At this point I have no clue wtf is going on unless the cas is bad.

Can a malfunctioning cam position sensor cause only one cylinder to misfire? We checked all connections to the cas according to the fsm. We checked all connections to the injector. Fixed a small short in the power wire to injector 2 so it now shows the correct 12 volts. We've used two different ecu's with no change in cylinder 2.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-01-2009, 06:57 PM	#7
invain Join Date: Jul 2008 Location: Michigan Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Yeah just ran through the guide in the fsm and checked all the connections. No dice. At this point I have no clue wtf is going on unless the cas is bad. Can a malfunctioning cam position sensor cause only one cylinder to misfire? We checked all connections to the cas according to the fsm. We checked all connections to the injector. Fixed a small short in the power wire to injector 2 so it now shows the correct 12 volts. We've used two different ecu's with no change in cylinder 2.