|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
|
Thread Tools | Display Modes |
10-11-2003, 03:34 PM
|
#7 |
|
Zilvia Addict
 |
What angle?
Looking at the pump fromthe driver side, you will see the bolt between the pulley and pump. Just turn the pulley until the slot is in front of the bolt.
A small extension with a 14 mm socket will do. Dont start your engine with all those bolts loose or missing, you will break something!!  |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode