Quote:
Originally Posted by g6civcx
It is possible. Use the signal from the turn signal switch as the trigger before the flasher relay.
|
Initially I was tapping into the wire that goes into the turn signal switch. There are 3 wires for the turn signal switch. when 1 and 3 are on, the left signal activates... when 1 and 2 are on, right signal. I used a multimeter to see if any of these wires had a constant 12V flow when the signal was on, and none of them did, they all fluctuated a pulse based on the signal. Is this a result of the relay sending out the pulse? If so, do you know which wire that goes into the flasher relay has a constant 12V source when a signal is activated?
05-26-2010, 01:21 PM
Threaded Mode