SR20DET, gets fuel, spark, but won't start...
I have a Redtop SR20DET in a 95 240SX (S14). I have finally wired everything up and got everything working (I think), but it will not crank up...I have tried everything. Here are the details: It gets gas (drained and fresh 93 octane added today), all 4 plugs fire when pulled out and grounded on the block, fuel pump runs, lines are ran correctly, it is in time according to an online guide that details the FSM method. The cams are correctly positioned (front lobes out and notches lined up with the different chain links) when cyl 1 is at TDC, the CAS was placed correctly with the dimples lined up right and the CAS about centered. I have tried moving it while cranking. It coughs once every 4-5 seconds when cranking and smells really strong like gas. When I take the plugs out, they are soaking wet. I can't figure it out!
[meant to post this in Engine Tech :/ ]
Last edited by IsaacMTSU; 03-03-2011 at 03:44 PM..
Reason: meant to post in engine tech
|
03-03-2011, 03:42 PM
Threaded Mode