no brake pressure - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mr. Spool · 05-19-2004, 02:54 PM

I recently replaced my front and rear pads, after doing my rear pads I started driving back and forth in my drive way, just to make sure every thing was set up right. after a few minutes I stopped and relized that I had not tightened the driverside rear bleeder screw. I leaked fluid everywhere, I have since bleed all my brakes, when the front of the car is up in the air there is brake pressure, but when the rear was up there was no break pressure, Does any body know why and what I can do about it?

there are no air bubles comming out anywere any more.

05-19-2004, 02:54 PM	#1
Mr. Spool Zilvia Addict Join Date: Jan 2003 Location: East Side, Michigan Age: 44 Posts: 622 Trader Rating: (0) Feedback Score: 0 reviews	no brake pressure I recently replaced my front and rear pads, after doing my rear pads I started driving back and forth in my drive way, just to make sure every thing was set up right. after a few minutes I stopped and relized that I had not tightened the driverside rear bleeder screw. I leaked fluid everywhere, I have since bleed all my brakes, when the front of the car is up in the air there is brake pressure, but when the rear was up there was no break pressure, Does any body know why and what I can do about it? there are no air bubles comming out anywere any more. __________________ 96' SE Turbo'd Super 60, S-AFC, SMIC, 370cc Injectors, Open Air BOV, Warblo 255 pump, Stage 3 Clutch Kyb agx, Sportline Springs Full body kit, Bomex rear, Drift sides, r34 front gunmetal rims, yok tires

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode