![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
Join Date: Jun 2012
Location: Las Vegas
Age: 31
Posts: 55
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
![]() Well, I just bought my first car...
Searched a lot for this problem, but couldn't find anything. '91 S13 sr20det redtop swap. This is what the seller posted. " -RedTop Sr20det With about 55,000 miles (chassis has 240k) -TOMEI Exhaust Manifold (bought this for $600) -New GodSpeed T25 Turbo(pushing 10 psi of boost) -3" Downpipe -Apexi Head Gasket -ARP Headstuds -BC Valve Springs -Lime green pullies -Big Front mount Intercooler -Knockoff Greddy BOV -Upgraded Walbro Fuel Pump - 4.5' Bolt On Catback Exhaust(Loud AF! Not no RICER Sound: Nice Deep tone!Beast)---- He had to take it off because cops pulled him over. He was gonna bring it to me, but I don't really care now. -Audi MAF Sensor -Exedy Stage 1 Clutch - aluminum radiator - Dual electric Audi Fans -Stock brakes -Lime Greens rear subframe -Tokiko suspension on 2.5inch drop Zenn springs -LSD (no welded Diff) -Battery Located to back -ADR 17' rims Good Thread on tires -Rear Spoiler & Hatch Visor _Has all Interior 7/10 _Nismo Shift Knob _GOD SPEED 3 Guage Pillar(water temp, Boost,Tachnometer) _Power Windows, Sunroof _Cracked Dash( like most 240s) _Has few Dents here and there Not to bad _could use a Paintjob bit faded on hood _No A/C _Has P/s Leaking a little bit of fluid. " $3500... Overpaid? There are few problems. When I bought it, it was running and idling good because the engine was warmed up and my mechanic said everything is alright. Drives good, idles bad. I still need to change the oil on the car. Won't start without MAF. It seems to have AUDI/VW MAF. AUDI fans. Has a power steering leak. Might have a boost leak, have to test for it yet. The car is really hesitant to start when the engine is cold. I need to press the gas pedal to keep it running when starting until it idles by itself. After I see that it can hold idle, it idles at around 1.5k RPMs. I have to open the hood and adjust this: ![]() Here is a video of it: http://youtu.be/WLB_D32LCHo Notice, after I revved it up, it started idling. It happens most of the time, so the engine might be getting flooded or something. Few pics of it: ![]() I am pretty sure that hole has to be plugged, but correct me if necessary. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Any help would be greatly appreciated. Thank you. Last edited by Aurimas; 11-01-2012 at 12:18 AM.. |
![]() |
![]() |
Sponsored Links |
Bookmarks |
Tags |
iacv, idle, knock, maf, sr20det |
Thread Tools | |
Display Modes | |
|
|