Flushed coolant, now motor is flooding(with gas) and won't start??????????? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

redsx13 · 02-04-2013, 01:55 AM

Ok. It's a Bone stock s13 SR. It was running find the day before this happened. I changed the radiator and coolant. Now the car wont start. Every time I try to start it, it will instantly flood with gas. If I pull the fuel pump fuse it will start and run for about 4 seconds till the cylinders/rail run out of leftover gas. But when I put the fuse back in and crank it, it instantly floods out again.

Here's what I've checked

Ecu has a code 34 (knock sensor)
Checked compression
Checked spark
Checked for stuck injectors
Checked injector o rings
Checked fuel rail pressure (40psi)
Checked grounds
Replaced ecu
Replaced igniter
Replaced ecu coolant temp sensor
Replaced cas

Any help is appreciated!

-Brandon

02-04-2013, 01:55 AM	#1
redsx13 Zilvia Junkie Join Date: Jan 2009 Location: Agoura Hills, Ca Age: 35 Posts: 572 Trader Rating: (6) Feedback Score: 6 reviews	Flushed coolant, now motor is flooding(with gas) and won't start??????????? Ok. It's a Bone stock s13 SR. It was running find the day before this happened. I changed the radiator and coolant. Now the car wont start. Every time I try to start it, it will instantly flood with gas. If I pull the fuel pump fuse it will start and run for about 4 seconds till the cylinders/rail run out of leftover gas. But when I put the fuse back in and crank it, it instantly floods out again. Here's what I've checked Ecu has a code 34 (knock sensor) Checked compression Checked spark Checked for stuck injectors Checked injector o rings Checked fuel rail pressure (40psi) Checked grounds Replaced ecu Replaced igniter Replaced ecu coolant temp sensor Replaced cas Any help is appreciated! -Brandon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode