No Spark...auto harness on 5spd

[StryfeS13]

So here's some info on the car. It's an 89 hatch with a KA24DE swapped into it..5 spd engine harness 5 spd tranny harness. Came 5 spd. The whole chassis harness has been replaced with one from a 93 240sx, so it's pretty much a DOHC chassis now.

It ran yesterday but the fusebox harness was really mangled so I swapped it out with an auto harness I had in the shed that is really clean. The first thing I noticed with the auto fusebox harness was that my car wouldn't crank. So I bypassed a plug and it cranks now. See below - this will be soldered/heatshrinked.



So with that jumped the car will crank over, but it won't spark... There are a few plugs on the new auto fusebox where I can't figure out where they go. Maybe someone can help me and maybe this is why it's not sparking?

1.




2.




3.




4.




5.



6.