Help! Nagging CEL won't go away >:( - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

simmode1 · 01-26-2015, 06:19 PM

Searched around & couldn't find a solution to my exact problem, so I thought I'd make a post because Zilvia is my only hope at this point! I got a bone stock OBDII '95 S14 with the original auto KA. It's had a CEL on since I bought it years ago & I can't get it to go away. Car drives & shifts gears just fine except for the tach needle bouncing around wildly from time to time. Pulled the codes on it and got these: p1445 & p0325. I replaced the knock sensor & the evap canister purge volume control valve, cleared the lights and they came right back. I need this fixed to pass inspection. I'm tired of paying $$$ under the table to get a sticker for a bone stock car!!! What am I missing here?

01-26-2015, 06:19 PM	#1
simmode1 Post Whore! Join Date: Feb 2008 Location: Addison, TX Posts: 5,526 Trader Rating: (0) Feedback Score: 0 reviews	Help! Nagging CEL won't go away >:( Searched around & couldn't find a solution to my exact problem, so I thought I'd make a post because Zilvia is my only hope at this point! I got a bone stock OBDII '95 S14 with the original auto KA. It's had a CEL on since I bought it years ago & I can't get it to go away. Car drives & shifts gears just fine except for the tach needle bouncing around wildly from time to time. Pulled the codes on it and got these: p1445 & p0325. I replaced the knock sensor & the evap canister purge volume control valve, cleared the lights and they came right back. I need this fixed to pass inspection. I'm tired of paying $$$ under the table to get a sticker for a bone stock car!!! What am I missing here? __________________ "Simplicity is the key to brilliance." - Bruce Lee

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode