![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Junkie
![]() Join Date: Oct 2001
Location: Los Angeles
Age: 44
Posts: 538
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
Help! SOHC->DOHC swap, idles weird, 3 codes
Ok i just did the dohc swap and it wont idle good, but it pulls hard and drives good, but it will jerk when i on/off throttle. it won't rev past 6000rpm, it just stop and the intake makes a loud popping noise.
it's a 98 S14 KA running on 92 DOHC Harness + 92 DOHC ECU + 92 DOHC sensors + 92 DOHC distributor...etc all the junk vacuume lines are removed down to only 1 vacuume line for fpr. checked no vacuume leaks. It idles perfect for about 5 seconds, then drops so low until it's about to die, then idles good again..then drops.. it just keeps doing this. ** when the idle is dropping , there's smoke come out of the tail pipe, it's unburnt gas for sure, it smells just like gasoline. timing is checked and but it shouldn't cause the weird idle right ? ECU pulled 3 codes: 12 - MAFS (I'm using S14 KA MAF, don't have S13 dohc maf) 21 - Primary ignition circuit 32 - EGR system (removed egr, everything) I thought the S14 KA MAF is the same as S13? the SAFC setting for both MAF are the same at least. |
![]() |
![]() |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|