KA24DE AT to MT swap question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

orion::S14 · 02-17-2005, 11:51 AM

Yes, it bolts up to the motor.

But there are issues:

You will always have a SES/CEL b/c the S13 bellhousing does not have the mount for the OBD crank position sensor.

The speed sensors are different.

other sensors are neutral position switch, reverse light switch, and 5th gear switch, they can be hard-wired, plugs will not match.

See here for more:

http://ka24development.com/transmission_swap.html

- - - - -

And BTW...next time, search a little. I've personally posted this info NUMEROUS times in the past, as have many others.

- Brian

02-17-2005, 11:51 AM	#3
orion::S14 Nissanaholic! Join Date: May 2003 Location: Orange Park, FL Posts: 1,666 Trader Rating: (0) Feedback Score: 0 reviews	Yes, it bolts up to the motor. But there are issues: You will always have a SES/CEL b/c the S13 bellhousing does not have the mount for the OBD crank position sensor. The speed sensors are different. other sensors are neutral position switch, reverse light switch, and 5th gear switch, they can be hard-wired, plugs will not match. See here for more: http://ka24development.com/transmission_swap.html - - - - - And BTW...next time, search a little. I've personally posted this info NUMEROUS times in the past, as have many others. - Brian __________________ www.KA24DEvelopment.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode