OhNo not another blown engine! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ant · 02-20-2002, 08:59 PM

Help! My '91 s13 has warped the head on engine #1 which blew a hole in the plastic radiator cap, blown piston #2 through the side of engine #2, and engine number three overheated the other night and after replacing the water pump and thermostat it is now blowing bubbles in the radiator and overflow tank.  It still runs okay, and has no oil in the water but it overheats in about 5 mins if I do anything but let it idle.  I am experiencing an out of money situation due to the piss poor economy that our nation has been experiencing and I need to know the most economical attack on this problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-20-2002, 08:59 PM	#1
ant Join Date: Feb 2002 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	Help! My '91 s13 has warped the head on engine #1 which blew a hole in the plastic radiator cap, blown piston #2 through the side of engine #2, and engine number three overheated the other night and after replacing the water pump and thermostat it is now blowing bubbles in the radiator and overflow tank.  It still runs okay, and has no oil in the water but it overheats in about 5 mins if I do anything but let it idle.  I am experiencing an out of money situation due to the piss poor economy that our nation has been experiencing and I need to know the most economical attack on this problem.