hi... is there a ignition 12v i can wire fal's to ?

[j00ni3]

my friend has a 96 s14 and we are trying to install fal 210s and i wired the fan to the blue wire with the green stripe under the fuse box ( the ac.rad fan one )

and it would not work, i saw and searched online and it would work with the stock ac fan but not this.

i think the fan amp draw is too much or something because

when i try to start it ... the breaker ? i think i don't know the cap thingy; clicks and the fans would not budge... but when i just wire it to the battery it works ...


is there anotehr 12v power source i can hook it up to ?

and if there is can you tell me exactly and how to hook itu p ?

im NOT very good with electric work so...

i searched and they were talking about the starter wire but how do it hook it up ?

is ther eanother line i can ?

also when i was wiring it to the fuse box... i saw a ground wire and a white wire with a red stripe... so what i tried is i ground the fan and linked the white wire with the red stripe to the plus on the fan it didn't work...


maybe if i try to wire it to the bottom and put the cap on ( the blue cap on the wires; the breaker thingy ) ... will taht work ?


if im not so clear just ask what im trying to say because im realy frustrated and the sun is gone and my friend needs his car by tomorrow... also i would look at my car because my car has the fal setup but it's at the shop so ...


thanks guys again