Upper chain guide removal? Should I? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jdkruger4 · 05-28-2002, 12:35 PM

I took my valve cover off to look at the upper chain guide cause something is clunking on startup and at idle and i thought it might be hte culpret. Well the bolts holding it are still tight but i can easily push the chain up onto it as there is only 1-3mm clearance between them. Should i go ahead and remove the guide? Or should i leave it on? Thanks!

05-28-2002, 12:35 PM	#1
jdkruger4 Leaky Injector Join Date: Oct 2001 Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	I took my valve cover off to look at the upper chain guide cause something is clunking on startup and at idle and i thought it might be hte culpret. Well the bolts holding it are still tight but i can easily push the chain up onto it as there is only 1-3mm clearance between them. Should i go ahead and remove the guide? Or should i leave it on? Thanks! __________________ stock '91 240sx, black, LE w/ 90k miles, and high performance spoiler rust that was poorly "fixed"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode