TUNE UP: Am I missing something? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

P4rD0nM3 · 05-23-2006, 06:46 PM

1. Replaced O2 sensor
2. Replaced Air Filter
3. Replaced Fuel Filter with 300zx
4. Replaced Oil Filter with OEM 240SX Filter (Replaced oil too)
5. Replaced Spark Plugs with NGK Iridium Spark Plugs
6. Replaced Spark Plug wires with NGK Spark 7mm Plug Wires
7. Replaced Distributor cap with a new one (Hitachi)
8. Replaced Rotor cap with a new one (Hitachi)
9. Replaced any leaking injectors with used but non-leaking ones

* After this, I poured seafoam in my almost empty (And I mean ALMOST EMPTY) gas tank. There's two more places that you should pour it but hehe I dunno how to properly do it, Kinematics showed me how but I tend to forget stuff).

* Then after doing the seafoam treatment, I filled the gas tank half way and waited until it's almost empty again and poured some Fuel System cleaner.

Anything else that I forgot to do?

05-23-2006, 06:46 PM	#1
P4rD0nM3 Zilvia FREAK! Join Date: Jun 2005 Location: Not Applicable Posts: 1,183 Trader Rating: (0) Feedback Score: 0 reviews	TUNE UP: Am I missing something? 1. Replaced O2 sensor 2. Replaced Air Filter 3. Replaced Fuel Filter with 300zx 4. Replaced Oil Filter with OEM 240SX Filter (Replaced oil too) 5. Replaced Spark Plugs with NGK Iridium Spark Plugs 6. Replaced Spark Plug wires with NGK Spark 7mm Plug Wires 7. Replaced Distributor cap with a new one (Hitachi) 8. Replaced Rotor cap with a new one (Hitachi) 9. Replaced any leaking injectors with used but non-leaking ones * After this, I poured seafoam in my almost empty (And I mean ALMOST EMPTY) gas tank. There's two more places that you should pour it but hehe I dunno how to properly do it, Kinematics showed me how but I tend to forget stuff). * Then after doing the seafoam treatment, I filled the gas tank half way and waited until it's almost empty again and poured some Fuel System cleaner. Anything else that I forgot to do?