Fresh Sr20det swap wont start - cranks and cranks... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TurbLu · 10-22-2006, 12:20 PM

Ok guys,

My Sr swap is in and wired up. Ive checked the wiring and it all *seems* correct. The power wire sending power to the coilpack plug (Blue/Red) is getting power. Now how do I check to make sure I AM getting spark? Could it be my plugs? I didnt change the plugs in the engine as my autozone here does not carry those NGK plugs. Is there an equivelant plug? They are nice and black and all fouled up, could this be the problem?

1. How do I check for spark if the Engine is not running. (can I do it the old fashion way with a screw driver in the tip of the coilpack?)
2. Is there an equivelant plug to the NGK I can pick up at the AutoZone?

10-22-2006, 12:20 PM	#1
TurbLu Zilvia Member Join Date: Sep 2006 Location: Las Vegas Posts: 197 Trader Rating: (0) Feedback Score: 0 reviews	Fresh Sr20det swap wont start - cranks and cranks... Ok guys, My Sr swap is in and wired up. Ive checked the wiring and it all seems correct. The power wire sending power to the coilpack plug (Blue/Red) is getting power. Now how do I check to make sure I AM getting spark? Could it be my plugs? I didnt change the plugs in the engine as my autozone here does not carry those NGK plugs. Is there an equivelant plug? They are nice and black and all fouled up, could this be the problem? 1. How do I check for spark if the Engine is not running. (can I do it the old fashion way with a screw driver in the tip of the coilpack?) 2. Is there an equivelant plug to the NGK I can pick up at the AutoZone?