Clutch/Flywheel Install Procedures

[jrmiller84]

Alright, so I ordered the rest of the parts for my swap today from Enjuku (sidenote: I'm broke now ). In my list I had a new spec stage 2 clutch and Ray said I should definately get a flywheel if I'm swapping the clutch. This is by far the scariest part of the install for me as I REALLY don't want to install it and have to take it back out so I'm trying to do a fuckton of research. Not to mention this is the first time I will have done it. I will be following this guide (http://www.zilvia.net/f/showthread.php?t=97080) since everyone on the thread seems to agee with his procedure. I also have the FSM to reference although I couldn't find much on anything pertaining to the flywheel.

My questions are... I understand that you use an alignment tool to get the clutch in correctly, is there any alignment that needs to be done to the flywheel? I read that it comes with mating marks on it but some people have just throw it on there and it works fine. Maybe these sources were a bunch of idiots, I trust you guys opinion more. I went through every flywheel thread here.

Also, I understand you need to apply a lithium grease (as noted in the thread above) to the clutch springs. Is there a particular kind/brand everyone prefers or a certain spec grease to use?