s14 injen intake install problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gunbbang82 · 05-13-2007, 09:42 PM

I just finished installing s14 injen intake on my 97. I noticed that there were only 2 nipples for the hoses instead of the 3 hoses ka24de has. one small, 2 big. I first just left the breather hose not connected to anything. But i felt uneasy knowing that unfiltered air was going in there so i made a ghetto solution. home depot + T junction.

Will this be okay? I checked the the junction to see if its getting any oil from the breather but it was clean. Is there are better solution?

05-13-2007, 09:42 PM	#1
gunbbang82 Join Date: Mar 2004 Location: NYC Age: 43 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	s14 injen intake install problem I just finished installing s14 injen intake on my 97. I noticed that there were only 2 nipples for the hoses instead of the 3 hoses ka24de has. one small, 2 big. I first just left the breather hose not connected to anything. But i felt uneasy knowing that unfiltered air was going in there so i made a ghetto solution. home depot + T junction. Will this be okay? I checked the the junction to see if its getting any oil from the breather but it was clean. Is there are better solution? Last edited by gunbbang82; 05-13-2007 at 10:09 PM..