what to put on pilot bushing? and a question about tranny fork clip - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nka203 · 06-20-2007, 01:57 AM

hey guys, sorry if i seem too careful/wutever with the questions but this is the second time i dropped the tranny this month and i want to get things done right. so any help would be appreciated. first, i heard that you have to put engine oil as lube on the pilot bearing, or can i just use regular grease that i use for input shaft and everything else? and second, what does this clip do and do i need it? it seems pretty easy to just fall out and bounce around in there.

also, i only put grease on the inside of the TOB carrier and none on the TOB itself correct?

thanks guys.

06-20-2007, 01:57 AM	#1
nka203 Zilvia Member Join Date: Jan 2007 Location: CA Posts: 184 Trader Rating: (2) Feedback Score: 2 reviews	what to put on pilot bushing? and a question about tranny fork clip hey guys, sorry if i seem too careful/wutever with the questions but this is the second time i dropped the tranny this month and i want to get things done right. so any help would be appreciated. first, i heard that you have to put engine oil as lube on the pilot bearing, or can i just use regular grease that i use for input shaft and everything else? and second, what does this clip do and do i need it? it seems pretty easy to just fall out and bounce around in there. also, i only put grease on the inside of the TOB carrier and none on the TOB itself correct? thanks guys.