perfect nitrous setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RedtopTech · 09-19-2007, 08:25 PM

for anyone attempting to wire in a nitrous kit on your s13, you may have trouble finding a sutable mounting location for the WOT micro switch. this is especially true on a redtop TB. i found that the vehicle is already equiped with a WOT switch on the gas pedal. i believe this switch to be used for disengagement of the ac compressor clutch. since i did away with ac when i performed my swap, i simply wired my arm switch in series with this factory switch. no more worries of a loose or improperly adjusted micro switch.

09-19-2007, 08:25 PM	#1
RedtopTech Zilvia Member Join Date: Dec 2005 Location: Virginia Beach, VA Age: 40 Posts: 293 Trader Rating: (0) Feedback Score: 0 reviews	perfect nitrous setup for anyone attempting to wire in a nitrous kit on your s13, you may have trouble finding a sutable mounting location for the WOT micro switch. this is especially true on a redtop TB. i found that the vehicle is already equiped with a WOT switch on the gas pedal. i believe this switch to be used for disengagement of the ac compressor clutch. since i did away with ac when i performed my swap, i simply wired my arm switch in series with this factory switch. no more worries of a loose or improperly adjusted micro switch.